Software Listing: Solidworks Part

	DXF Export for SolidWorks | License: Shareware |
	DXF Export for SolidWorks is an AutoCAD® DXF file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to 3D Polyface Meshes in an AutoCAD DXF file. DXF Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to an ASCII DXF file as 3D Polyface mesh objects. The level of tessellation can be controlled by adjusting the resolution slider in the DXF Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces). Publisher: SYCODE| Date: 23-11-2006 | Size: 2089 KB
	-

	3DS Export for SolidWorks | License: Shareware |
	3DS Export for SolidWorks is a 3D Studio® 3DS file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to meshes in a 3DS file. 3DS Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to 3DS file as mesh objects. The level of tessellation can be controlled by adjusting the resolution slider in the 3DS Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces). Publisher: SYCODE| Date: 23-11-2006 | Size: 2220 KB
	-

	OBJ Export for SolidWorks | License: Shareware |
	OBJ Export for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to export graphical data to ASCII Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ Export for SolidWorks tessellates the surfaces of a part and writes the triangular surfaces of the part to an OBJ file. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	Points Import for SolidWorks | License: Shareware |
	Points Import for SolidWorks is a add-in for SolidWorks. This plug-in gives SolidWorks the ability to import points from text files. Points Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a point file select Open from the File menu. Select "Point Files (*.txt)" from the "Files of type" combo box and select a point file to import. A new part document will be created containing the imported points.. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	NC Import for SolidWorks | License: Shareware |
	NC Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to convert tool movements in NC commands to corresponding lines and arcs in a SolidWorks 3D sketch. CNC Machines worldwide use Numeric Control files (.nc or .ncc) to convert programmed instructions to tool movement. NC programs consist of a sequence of codes with parameter data to arrive at a precise description of the toolpath. But the best of NC programmers also can make mistakes. NC Import for SolidWorks lets you import NC files into SolidWorks so that you can view the intended toolpath in 3D and create curves and surfaces directly from the toolpath. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	STL Import for SolidWorks | License: Shareware |
	STL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from ASCII as well as binary Stereolithography (STL) files. The STL file format has become the Rapid Prototyping industry's standard data transmission format and is the format required to interact with stereolithography machines. This format approximates the surfaces of a solid model with triangles. Stereolithography files contain solids which are made up of 3 sided facets. STL Import for SolidWorks reads these triangular surfaces and knits them into a solid in a new SolidWorks part document. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	OBJ Import for SolidWorks | License: Shareware |
	OBJ Import for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to import graphical data from ASCII Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ files contain solids which are made up of 3 or 4 sided faces. OBJ Import for SolidWorks reads these surfaces and knits them into a solid in a new SolidWorks part document. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	PLT Import for SolidWorks | License: Shareware |
	PLT Import for SolidWorks is a HPGL Plot (.plt) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from PLT files. PLT Import for SolidWorks reads pen movement data stored PLT files and imports it into SolidWorks. A HPGL PLT file is comprised of a set of instructions related to pen movements of HPGL plotters. PLT Import for SolidWorks reads these pen movement instructions and creates curve objects in a SolidWorks document. The curves can me created as a 3D Sketch in a part or assembly document or a 2D Sketch in a drawing document. PLT Import for SolidWorks is very easy to use as it adds new commands to SolidWorks. Publisher: SYCODE| Date: 23-11-2006 | Size: 1139 KB
	-

	PLT Export for SolidWorks | License: Shareware |
	PLT Export for SolidWorks is a HPGL Plot PLT file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export geometric data from a SolidWorks drawing document to a HPGL PLT file. PLT Export for SolidWorks reads curve data from a SolidWorks drawing document and converts it into corresponding pen movements in a HPGL Plot file. PLT Export for SolidWorks is very easy to use. Once installed, it automatically loads itself into SolidWorks and adds a new submenu called "PLTExport" to the SolidWorks menu. The 'PLTExport' menu consists of the following commands: # Export - Export objects to a PLT file # Help - Display the PLT Export for SolidWorks help file # Register - Register your copy of PLT Export for SolidWorks # About - Display the PLT Export for SolidWorks About box PLT Export for SolidWorks comes with detailed documentation for each command as well as a tutorial to get you started in the shortest possible time. Publisher: SYCODE| Date: 23-11-2006 | Size: 1128 KB
	-

	3DM Import for SolidWorks | License: Shareware |
	3DM Import for SolidWorks is a Rhinoceros (.3dm) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DM files. 3DM Import for SolidWorks reads polygon mesh and curve data stored in 3DM files and imports it into SolidWorks. A polygon mesh in a 3DM file is comprised of a set of triangular/quad faces. 3DM Import for SolidWorks creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DM Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1314 KB
	-

	3DS Import for SolidWorks | License: Shareware |
	3DS Import for SolidWorks is a 3D Studio® (.3ds) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DS files. 3DS Import for SolidWorks reads polygon mesh data stored in 3DS files and imports it into SolidWorks. A polygon mesh in a 3DS file is comprised of a set of triangular faces. 3DS Import for SolidWorks creates trimmed planar surfaces for each triangle and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DS Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1190 KB
	-

	HPGL Export for SolidWorks | License: Shareware |
	HPGL Export for SolidWorks is a HPGL plot file export add-in for SolidWorks. This add-in gives SolidWorks the ability to export geometric data from SolidWorks drawings to HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: SYCODE| Date: 10-10-2005 | Size: 375 KB
	-

	PIX Import for SolidWorks | License: Shareware |
	PIX Import for SolidWorks is a Dr. Picza (.pix) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from PIX files. PIX Import for SolidWorks reads surface and polygon mesh data stored in PIX files and imports it into SolidWorks. If the PIX file contains a scan of a surface PIX Import for SolidWorks creates a single trimmed surface describing the scanned surface. This surface can be converted into a solid by giving it a thickness. If the PIX file contains the scan information in the form of a polygon mesh PIX Import for SolidWorks creates a body describing the object that was scanned. Publisher: SYCODE| Date: 23-11-2006 | Size: 1194 KB
	-

	HPGL Import for SolidWorks | License: Shareware |
	HPGL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from Hewlett Packard Graphic Language Plot files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	ModelPress Desktop | License: Demo |
	Use ModelPress Desktop to view, measure and publish Multi-format 3D CAD formts to open Solidworks, Solid Edge, Inventor, IGES, STL, VRML and more. View, measure, explode, cross section, locate parts by name, etc. Publish all or part to 3DF & DWF.. Publisher: Informative Graphics Corp| Date: 03-06-2005 | Size: 19411 KB
	-

	MITCalc | License: Shareware |
	MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, pins, buckling, shaft, springs, bolt connection, welding, shaft connection, tolerance analysis, tolerances and many others. Publisher: MITCalc| Date: 16-09-2008 | Size: 17163 KB
	-

	HatchKit | License: Demo |
	HatchKit v2.6 CAD Visual CAD Hatch Pattern Editor HatchKit provides a complete visual solution to your custom hatch pattern creation and modification requirements. HatchKit is also handy for inspecting hatch patterns. HatchKit supports all versions of AutoCAD, ACADLT, Alibre, AllyCAD, DataCAD, General CADD, IntelliCAD, MegaCAD, MicroStationV8, Revit, SolidWorks, Spirit, TurboCAD, VersaCAD or Visual CADD including verticals such as Autodesk Architectural Desktop. New in HatchKit 2.6 Object Snap within template and neighboring repeats Filename histories Measurement tool DXF ELLIPSE, POLYLINE and LWPLINE import Paste from Windows Clipboard Alibre, AllyCAD, DataCAD v10 and SPIRIT file formats Large scale Revit model patterns and much more. Publisher: Cadro Pty Ltd| Date: 22-10-2006 | Size: 1286 KB
	-

	SCEA Part 2 & 3 Exam EPractize Labs | License: Shareware |
	SCEA Part 2 & Part 3 Exam EPractize Labs – is configurable by the administrator. It is a complete training environment and has features for preparaing SCEA - Sun Certified Enterprise Architect for the Java 2 Platform, Enterprise Edition Part 2 assignment exam and Part 3 essay exam. Set goals and Schedule - You can set goals and create schedule to your trainees. Manage Examinees - Create examinees/trainees. Trackers - You can view the progress of the examinees using various trackers - Goals Tracker and Schedule Tracker. Send Reports - You can send the reports to the examinees. Publisher: EPractize Labs Software Private Limited| Date: 28-06-2006 | Size: 32226 KB
	-

	Acmeta Fragmento | License: Shareware |
	If your professional activities involve using the Internet, then you have probably experienced times when you need to print, save, transfer to your handheld, or otherwise use some information from a web page. And, usually you do not need the entire page, with its navigation, banners and advertising, and other stuff. These unnecessary parts of the web page are sometimes harmful by making the page so wide that it does not even fit the paper in your printer, or the screen of your handheld, etc. A common solution to this problem is to select the necessary part of the page, copy it to the clipboard and paste it into some other application like Microsoft Word or Notepad where it can be printed or saved. Publisher: Acmeta| Date: 01-02-2006 | Size: 392 KB
	-

	MITCalc - Rolling Bearings Calculation III (FAG) | License: Shareware |
	This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from FAG,INA - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks, SolidEdge, Pro/E). Publisher: MITCalc| Date: 04-12-2006 | Size: 2028 KB
	-

	Advanced Process Manipulation | License: Freeware |
	DiamondCS Advanced Process Manipulation (APM) is an advanced process/module viewer and manipulation utility that allows unique control over target processes by literally becoming a part of them. Take control of a process by becoming a part of it ... Unlike conventional process viewers, DiamondCS APM doesn't control processes by remotely sending them instructions. Instead, APM safely attaches a part of itself to the target process, essentially becoming a part of that process. Once 'inside', APM is free to perform actions on behalf of the target process. For example, if it calls the ExitProcess API function, the target process terminates. Publisher: Diamond Computer Systems| Date: 25-08-2005 | Size: 44 KB
	-

	MITCalc - Rolling Bearings Calculation | License: Shareware |
	This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks). Publisher: MITCalc| Date: 11-04-2005 | Size: 2196 KB
	-

	LanHunter | License: Shareware |
	LanHunter makes it easy to search for files on your local network (LAN).LanHunter offers the most direct way to locate a file. Use LanHunter if you are looking for common file types, if you remember all or part of the name of the file you want to find, or if you know when you last changed a file. If you know only part of the name, you can use wildcard characters to locate all files that include that part in the name.. Publisher: WaterfallSoft| Date: 29-10-2002 | Size: 986 KB
	-

	MPEG AVI DVD Cutter | License: Demo |
	Cut out advertisements and parts you do not like of your DVDs and video files (MPEG and AVI). Select a part of the video with the mouse. You will see a preview of the selected frame with every mouse click. Then you click on "Cut selection". You can do this with an unlimited number of parts of the film. Then you can save the result as new mpeg or avi file. You can also use the program to split a video file into two parts so that each part fits on one CD for example. If you first cut off the second part and the the first part of the file.. Publisher: CAD-KAS GbR| Date: 30-11-2005 | Size: 1225 KB
	-

	MITCalc - Planet Gear Calculation | License: Shareware |
	Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength. Publisher: MITCalc| Date: 15-09-2008 | Size: 1941 KB
	-

	Clean My Registry for U3 | License: Freeware |
	The Windows Registry is a crucial part of your PC's operation system. Regular use of computer makes the registry fragmented and cluttered with obsolete and invalid data. Clean My Registry software keeps this critical part of your PC in perfect condition. Just clean registry in a blink of an eye. The software has a unique feature of monitoring the Windows registry during installation and un-installation of software that helps you to control your PC Windows registry. Updated and improved edition of Clean My Registry runs on Windows 95/98/ME/NT/2000/XP/2003/Vista. This latest title has a free download available to the public. Publisher: Smart PC Solutions, Inc.| Date: 03-07-2007 | Size: 1262 KB
	-

	MITCalc -Rolling Bearings Calculation II | License: Shareware |
	This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc. Publisher: MITCalc| Date: 01-07-2005 | Size: 2365 KB
	-

	progeCAD 2008 Standard | License: Shareware |
	ProgeCAD IntelliCAD natively reads and writes AutoCAD DWG files, no need for conversion! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! progeCAD 2008 Standard is an easy replacement for AutoCAD and AutoCAD LT! AutoCAD DWG File 2.5 - 2008 Open and Save Compatible with AutoCAD menus, scripts, fonts, etc. Compatible with AutoLISP, ADS and COM. Publisher: iCADsales.com| Date: 30-11-2007 | Size: 73473 KB
	-

	WinPDFprint | License: Shareware |
	On Windows WinPDFprint is the simpler way to print your PDF archive or part of it. You can select PDFs and create a list or directly import a list and schedule when to print them on the default printer. Today the purpose of WinPDFprint is to help you to solve this problem: how can I print batch (e.g. this night) a lot of PDFs?. Publisher: SANFACE Software| Date: 25-02-2003 | Size: 79 KB
	-

	DXF Export for Solid Edge | License: Shareware |
	DXF Export for Solid Edge is an AutoCAD® DXF file export add-in for Solid Edge®. This add-in gives Solid Edge the ability to export 3D solid and surface data from a Solid Edge part or assembly document to 3D Polyface Meshes in an AutoCAD DXF file. DXF Export for Solid Edge tessellates the solid bodies in a Solid Edge part or assembly document into individual triangular meshes. These meshes are then exported to an ASCII DXF file as 3D Polyface mesh objects. The DXF file can then be imported into a variety of CAD applications. DXF Export for Solid Edge is very easy to use. Once installed, it automatically loads itself into Solid Edge and adds a new submenu called "DXF Export for Solid Edge" to the Solid Edge Applications menu. Publisher: SYCODE| Date: 23-11-2006 | Size: 1141 KB
	-

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |