Software Listing: Solidworks Component

	DXF Export for SolidWorks | License: Shareware |
	DXF Export for SolidWorks is an AutoCAD® DXF file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to 3D Polyface Meshes in an AutoCAD DXF file. DXF Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to an ASCII DXF file as 3D Polyface mesh objects. The level of tessellation can be controlled by adjusting the resolution slider in the DXF Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces). Publisher: SYCODE| Date: 23-11-2006 | Size: 2089 KB
	-

	3DS Export for SolidWorks | License: Shareware |
	3DS Export for SolidWorks is a 3D Studio® 3DS file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to meshes in a 3DS file. 3DS Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to 3DS file as mesh objects. The level of tessellation can be controlled by adjusting the resolution slider in the 3DS Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces). Publisher: SYCODE| Date: 23-11-2006 | Size: 2220 KB
	-

	NC Import for SolidWorks | License: Shareware |
	NC Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to convert tool movements in NC commands to corresponding lines and arcs in a SolidWorks 3D sketch. CNC Machines worldwide use Numeric Control files (.nc or .ncc) to convert programmed instructions to tool movement. NC programs consist of a sequence of codes with parameter data to arrive at a precise description of the toolpath. But the best of NC programmers also can make mistakes. NC Import for SolidWorks lets you import NC files into SolidWorks so that you can view the intended toolpath in 3D and create curves and surfaces directly from the toolpath. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	Points Import for SolidWorks | License: Shareware |
	Points Import for SolidWorks is a add-in for SolidWorks. This plug-in gives SolidWorks the ability to import points from text files. Points Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a point file select Open from the File menu. Select "Point Files (*.txt)" from the "Files of type" combo box and select a point file to import. A new part document will be created containing the imported points.. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	PLT Export for SolidWorks | License: Shareware |
	PLT Export for SolidWorks is a HPGL Plot PLT file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export geometric data from a SolidWorks drawing document to a HPGL PLT file. PLT Export for SolidWorks reads curve data from a SolidWorks drawing document and converts it into corresponding pen movements in a HPGL Plot file. PLT Export for SolidWorks is very easy to use. Once installed, it automatically loads itself into SolidWorks and adds a new submenu called "PLTExport" to the SolidWorks menu. The 'PLTExport' menu consists of the following commands: # Export - Export objects to a PLT file # Help - Display the PLT Export for SolidWorks help file # Register - Register your copy of PLT Export for SolidWorks # About - Display the PLT Export for SolidWorks About box PLT Export for SolidWorks comes with detailed documentation for each command as well as a tutorial to get you started in the shortest possible time. Publisher: SYCODE| Date: 23-11-2006 | Size: 1128 KB
	-

	OBJ Export for SolidWorks | License: Shareware |
	OBJ Export for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to export graphical data to ASCII Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ Export for SolidWorks tessellates the surfaces of a part and writes the triangular surfaces of the part to an OBJ file. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	3DS Import for SolidWorks | License: Shareware |
	3DS Import for SolidWorks is a 3D Studio® (.3ds) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DS files. 3DS Import for SolidWorks reads polygon mesh data stored in 3DS files and imports it into SolidWorks. A polygon mesh in a 3DS file is comprised of a set of triangular faces. 3DS Import for SolidWorks creates trimmed planar surfaces for each triangle and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DS Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1190 KB
	-

	HPGL Export for SolidWorks | License: Shareware |
	HPGL Export for SolidWorks is a HPGL plot file export add-in for SolidWorks. This add-in gives SolidWorks the ability to export geometric data from SolidWorks drawings to HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: SYCODE| Date: 10-10-2005 | Size: 375 KB
	-

	PLT Import for SolidWorks | License: Shareware |
	PLT Import for SolidWorks is a HPGL Plot (.plt) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from PLT files. PLT Import for SolidWorks reads pen movement data stored PLT files and imports it into SolidWorks. A HPGL PLT file is comprised of a set of instructions related to pen movements of HPGL plotters. PLT Import for SolidWorks reads these pen movement instructions and creates curve objects in a SolidWorks document. The curves can me created as a 3D Sketch in a part or assembly document or a 2D Sketch in a drawing document. PLT Import for SolidWorks is very easy to use as it adds new commands to SolidWorks. Publisher: SYCODE| Date: 23-11-2006 | Size: 1139 KB
	-

	PIX Import for SolidWorks | License: Shareware |
	PIX Import for SolidWorks is a Dr. Picza (.pix) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from PIX files. PIX Import for SolidWorks reads surface and polygon mesh data stored in PIX files and imports it into SolidWorks. If the PIX file contains a scan of a surface PIX Import for SolidWorks creates a single trimmed surface describing the scanned surface. This surface can be converted into a solid by giving it a thickness. If the PIX file contains the scan information in the form of a polygon mesh PIX Import for SolidWorks creates a body describing the object that was scanned. Publisher: SYCODE| Date: 23-11-2006 | Size: 1194 KB
	-

	STL Import for SolidWorks | License: Shareware |
	STL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from ASCII as well as binary Stereolithography (STL) files. The STL file format has become the Rapid Prototyping industry's standard data transmission format and is the format required to interact with stereolithography machines. This format approximates the surfaces of a solid model with triangles. Stereolithography files contain solids which are made up of 3 sided facets. STL Import for SolidWorks reads these triangular surfaces and knits them into a solid in a new SolidWorks part document. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	3DM Import for SolidWorks | License: Shareware |
	3DM Import for SolidWorks is a Rhinoceros (.3dm) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DM files. 3DM Import for SolidWorks reads polygon mesh and curve data stored in 3DM files and imports it into SolidWorks. A polygon mesh in a 3DM file is comprised of a set of triangular/quad faces. 3DM Import for SolidWorks creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DM Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1314 KB
	-

	HPGL Import for SolidWorks | License: Shareware |
	HPGL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from Hewlett Packard Graphic Language Plot files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	OBJ Import for SolidWorks | License: Shareware |
	OBJ Import for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to import graphical data from ASCII Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ files contain solids which are made up of 3 or 4 sided faces. OBJ Import for SolidWorks reads these surfaces and knits them into a solid in a new SolidWorks part document. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	.NET Domain Who Is Component | License: Freeware |
	The SfbDomainWhoIs component is a powerful component and easy to use implementation of the Who Is protocol for .NET and ASP.NET applications. It allows developers to perform domain registration lookups easily with a few lines of code.. Publisher: Safabyte| Date: 08-02-2008 | Size: 3983 KB
	-

	ModelPress Desktop | License: Demo |
	Use ModelPress Desktop to view, measure and publish Multi-format 3D CAD formts to open Solidworks, Solid Edge, Inventor, IGES, STL, VRML and more. View, measure, explode, cross section, locate parts by name, etc. Publish all or part to 3DF & DWF.. Publisher: Informative Graphics Corp| Date: 03-06-2005 | Size: 19411 KB
	-

	TIFF Page Counter COM Component | License: Shareware |
	The com component will quickly tell you how many pages are in a tiff file, ideal for web sites that serve tiff content. Example .asp code included simple ASP example of usage:- Set Obj = Server.CreateObject("TIFFPAGECOUNTCOM.CTIFFPageCount.1") dim pages pages = Obj.GetPages("C:yourtif.tif" ). Publisher: Traction Software| Date: 30-07-2003 | Size: 1165 KB
	-

	Pivo FTP Component | License: Freeware |
	The Pivo FTP component is a fully featured, easy to use implementation of the FTP protocol for .NET, ASP.NET and COM based applications. Fully compliant with RFC 959 and related RFCs, the component has been thoroughly tested with all popular FTP servers. The component is written in 100% managed C# code. Pivo FTP is a Server component completely written using .NET technology. It can be used with any window, web based .NET applications and COM clients to programmatically add FTP functionality. Pivo FTP is a low overhead, highly optimized assembly that only needs the Microsoft .NET (or equivalent) framework to run. Publisher: Pivo Corporation| Date: 25-08-2005 | Size: 232 KB
	-

	QRCode 2D Barcode ASP.Net Component | License: Shareware |
	Our lightweight QRCode ASP.Net component is 100% managed C# code product which can add professional quality 2D barcode image to your ASP.Net web pages running on the IIS server.. Publisher: MW6 Technologies, Inc.| Date: 01-08-2004 | Size: 976 KB
	-

	QRCode 2D Barcode ASP Component | License: Shareware |
	Our small footprint QRCode ASP component is an ATL COM product which can add professional quality 2D barcode PNG format image to your web pages running on the IIS server.. Publisher: MW6 Technologies, Inc.| Date: 01-08-2004 | Size: 976 KB
	-

	LetSnow Flash Snow Effect Component | License: Shareware |
	LetSnow Flash Component Info LetSnow Flash Component is a standard extension for Adobe Flash CS3. You simply install the MXP file and then you just drag & drop the extension from the Components panel onto the scene of your movie. The component can be used in a movie with any structure. You can control the component to create snow effect. Component Features We have built our component to be easily customizable and easy to use. You can set the size of the snowflakes, the power of the wind, the amount of gravity, and many other parameters.. Publisher: LetSnow.net| Date: 16-01-2008 | Size: 8 KB
	-

	aaxDriveManager | License: Shareware |
	The aaxDriveManager ActiveX Control is a component that gives you an easy access to manage disk and CDROM drives. With this component, you can: - Eject CD and media; - Query for drive types and availability; - Get drive capacity and free space; - Get/Set volume label This component can be used with disk drives, CD-ROM drives, floppy drives, etc. This component comes with full documentation and many Visual Basic samples.. Publisher: aaxComponents| Date: 20-03-2003 | Size: 661 KB
	-

	ASPFileSaver | License: Demo |
	ASP component to save files uploaded using the browse button in the browser. Files can be saved to disk or exported as binary data for use by a database or other component. Functions are provided to read form variables. This component is can be supplied singly or bundled with our ASPPhotoResizer component. Free trial available.. Publisher: ASPPhotoResizer.com| Date: 26-04-2005 | Size: 130 KB
	-

	PDF Focus .Net | License: Shareware |
	100% C# .Net component to convert PDF to Word. It can work with PDF string and files. Component supports converting with: - font face, color and size; - tables and nested tables; - table borders, background; - images (png, jpg, wmf, bmp); - bullets; - ordered lists; - hyperlinks; - page numbers; - italic, bold and underline text, strike; - subscript and superscript text; - background colors; - header, footer and page sections; - other text formatting. Component has: Four methods of PDF to Word (RTF) converting: - ConvertString(); - ConvertFile(); - ConvertStringToFile(); - ConvertFileToString(). Publisher: SautinSoft| Date: 21-05-2008 | Size: 934 KB
	-

	Pivo InI Component | License: Freeware |
	INI component reads and writes Windows style INI files. It provides a comprehensive set of functions making INI files a powerful way to store application settings. There are three common ways to store program information on the hard disk: in the Windows registry, in INI files or in XML files. Using XML files is the preferred way to store initialization data in .NET (the registry is getting cluttered which makes it slow and INI files are much less flexible than XML files). However, if you're porting applications from older platforms to .NET, or if your data initialization file structure must be compatible with some other program, sometimes you're forced to use INI files. Publisher: Pivo Corporation| Date: 30-09-2005 | Size: 232 KB
	-

	ZylTimer.NET | License: Shareware |
	ZylTimer.NET is a high resolution .NET timer component which provides a higher precision than the standard .NET Timer component. .NET Timer component which ships with Delphi / C++Builder uses the Windows Message Queue to generate the Tick event. Due to this approach it's impossible to get accurate timer intervals smaller than 50 milliseconds. ZylTimer.NET is a thread based timer and due to this architecture provides a real precision of 1 millisecond which is inevitable in time critical applications. The Tick event is always fired in time which is not available for the standard .NET Timer, when there are too many messages processed. Publisher: Zyl Soft| Date: 25-05-2006 | Size: 339 KB
	-

	Aspose.AdHoc | License: Shareware |
	Aspose.AdHoc is a ASP.Net component. With the Ad Hoc Query Builder component you can quickly and easily add ad hoc capabilities to you ASP.Net application. The ad hoc component can be used for a variety of task, ranging from ad hoc reports to quick and easy search screens. Simply drag and drop the ad hoc component on to your web form, assign a DataTable object as the data source and let the component do the rest. Since the ad hoc component uses a DataTable object as its data source, you can use virtually any database back end. The ad hoc component offers a variety of output, including: SQL statement, Select statement, Where statement, Order By statement, RowFilter statement, Filtered DataView, Filtered DataTable or Filtered DataSet. Publisher: Aspose Pty Ltd| Date: 25-07-2005 | Size: 4372 KB
	-

	aaxIniFile | License: Shareware |
	The aaxIniFile ActiveX Control is a component that gives you an easy access to any standard .ini initialization file. With this component, you can: - Open standard .ini files; - Read / Write string and numeric values; - Enumerate sections and keys This component comes with full documentation and many Visual Basic samples.. Publisher: aaxComponents| Date: 13-03-2003 | Size: 646 KB
	-

	tssHookDisc | License: Demo |
	tssHookDisc is a ActiveX/COM component that provides notifications whenever it detects a disc insertion or removal into any CD/CDR/DVD drive. When a disc is inserted/removed, you will notified using two events. You also are told which drive is being utilized! Your business can save a lot by using our component instead of trying to develop this in-house. Why spend countless hours trying to do it yourself? tssHookDisc does it now!. Publisher: Teebo Software Solutions| Date: 17-12-2002 | Size: 1106 KB
	-

	Pivo Command Component | License: Shareware |
	An Internet utility that returns information about commands which can be executed in command line such as ping, nslookup and dir etc. It is a component class designed for calling an external command line from within a Windows Forms application (or any other application that wants to avoid opening a console window) and receiving its text output. This works for stand-alone command line applications as well as for commands invoking the Windows command line processor (so-called DOS commands).This is an Internet service that finds information about a commands which can be used in command prompt. To see the COMMAND service in action, check out our command component. Publisher: Pivo Corporation| Date: 08-11-2005 | Size: 232 KB
	-

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |