Software Listing: Servo
- Servo motors controller
- License: Freeware
- Price: 0.00

It's a servo controller for six servo motors. It can be used to control a antropomorphic arm with six motors. For a correct execution, it must select the motors following this table: #servo - char to use for the motor selection 1 a 2 b 3 c 4 d 5 e 6 f The microcontroller must use the same char. It uses a serial communication via RS232 protocol..
- Publisher: Andrea Cirillo
- Date: 11-05-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- SERVO MOTOR CONTROL
- License: Freeware
- Price: 0.00

CONTROL SERVO MOTORS USING MATLAB AND PIC 16F628A.
- Publisher: Diego Orlando Barragan Guerrero
- Date: 21-01-2013
- Size: 61 KB
- Platform: Matlab, Scripts
- Simulink Arduino Servo Write Block
- License: Shareware

Generate code to control Servo drive attached to Arduino This submission is basically a patch for official Simulink Arduino target found here: http://www.mathworks.com/matlabcentral/fil...age-for-arduino This patch adds in the Servo Write block, which can be used to generate code and control your Servo drive attached to Arduino. This block has been tested with Arduino Nano, Motor Shield v3 and Hitec HS-422 servo. You need to install the official Simulink Target Support for Arduino first and then apply this patch by overwriting original files from that target support..
- Publisher: Mikhail
- Date: 20-05-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Servo Speed
- License: Freeware
- Price: 0.00

Servo Speed is a simple tool designed to simulate a servo motor rotation, depending on its speed.
The application allows you to enter the speed in sec/60 degrees and displays the RPM depending on the rotation angle you choose.
.
- Publisher: Ahmad Shojaeddin
- Date:
- Platform: Windows 7, WinOther, WinVista
- ACS USB servo controller device driver
- License: Freeware
- Price: 0.00

Device Driver for the ACS USB servo controller (USBB-01 interface card). HID class USB device to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink outputs..
- Publisher: usbservoctrl.sourceforge.net
- Date: 02-07-2012
- Size: 18 KB
- Platform: Linux, Unix
- SAM (Servo Actuation Manipulator)
- License: Freeware
- Price: 0.00

SAM (Servo Actuation Manipulator) is a GTK+ based X windows application for controlling anywhere from 1 to 254(so far) servo motors via a serial port connection, specifically this program was made for the Scott Edwards Electronics Mini SSC II..
- Publisher: servo.sourceforge.net
- Date: 12-09-2012
- Size: 234 KB
- Platform: Linux, Unix
- Servo-Trim
- License: Freeware
- Price: 0.00

Servo-Trim uses an Atmel ATtiny2313 microcontroller to apply a nonlinear transfer function to standard RC-component signals. Used e.g. between receiver and servo..
- Publisher: servo-trim.sourceforge.net
- Date: 02-07-2012
- Size: 11 KB
- Platform: WinOther
- Hydraulic servo actuators
- License: Freeware
- Price: 0.00

Hydraulic servo actuators (HSAs) are used to precisely control displacement in a wide range of equipment. Generally, a hydraulic servo actuator consists of a hydraulic actuator controlled by a directional control valve of an infinite number of positions and equipped with a feedback arrangement. This simulink file simulated the dynamic behavior of a hydraulic servoactuator. The simulation program is based upon a detailed nonlinear model and a transfer function. The construction, operation, applications and mathematical models are given in my book: M Galal Rabie, Fluid power Engineering, McGraw-Hill, NY, May 2009.
- Publisher: M Galal Rabie
- Date: 27-05-2013
- Size: 92 KB
- Platform: Matlab, Scripts
- Servo System Blockset
- License: Freeware
- Price: 0.00

The Servo System Blockset is designed to provide a modern design tool that will allow scientists and engineers to rapidly and easily build models that simulate servo systems. It has blocks for the simulation of (1) Permanent Magnet DC Motor (Armature Control) (2) Field Controlled DC Motor (3) ED 4400 DC Servo Motor (For demo purposes) Blocks for the simulation of AC motors will be included in the next version of the blockset. The Servo System Blockset is created with MATLAB 5.3.1 and Simulink 3.0.1 (i.e. MATLAB Release 11.1), using the Windows 98-SE operating system. It has been tested under Windows 98, 2000, and XP operating systems.
- Publisher: Khalil Sultan
- Date: 03-01-2013
- Size: 410 KB
- Platform: Matlab, Scripts
- ssc32 servo controller
- License: Freeware
- Price: 0.00

Tcl/Tk interface for the SSC-32 servo controller. Sliders generate position commands and send them to the ssc32 via serial output. The number of servos can be changed. Positions can be captured and replayed using the macro function. Added group controls.
ssc32 servo controller License - GNU General Public License (GPL).
- Publisher: Ssc32controller
- Date:
- Platform: WinOther
- USB 16-servo controller Tester
- License: Freeware
- Price: 0.00

QT4 Linux software to test the Pololu USB 16-servo controller. Just checkout with eclipse and svn the repository HEAD and build it with make.
USB 16-servo controller Tester License - GNU General Public License (GPL).
- Publisher: Usb16servo
- Date:
- Platform: WinOther
- Graupner Servo Finder
- License: Freeware
- Price: 0.00

Finden Sie immer das richtige Servo für Ihre Anwendung! Mit der Servo Finder App von Graupner!
Mit dieser praktischen kostenlosen App für alle Android Smartphones und Tablets finden Sie in unserem umfangreichen Servo-Sortiment immer das perfekte Servo für jeden Einsatzzweck!
Konfigurieren Sie Ihre Suche selbst nach einfachen Parametern wie Baugröße, Stellzeit, Haltemoment, Lagerung oder Getriebeart und die App zeigt Ihnen alle zu den getroffenen Einstellungen gefundenen Servotypen aus dem Graupner Produktportfolio.
Natürlich ist dieser Service für Sie kostenlos!
.- Publisher: Graupner/SJ GmbH
- Date: 02-09-2014
- Size: 6246 KB
- Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
- Arduino USB Servo Motor
- License: Freeware
- Price: 0.00

Arduino USB Servo Motor Control Application is allow you to control Servo Motor position.( 0 - 180 degree )
This App must connect to Arduino with USB-OTG then control Servo Motor.
So,your Android device must support USB-OTG.
The Application Features
- Control 0 - 180 Degree of Servo Motor position with progress bar , knob and Fixed degree.( PWM Output )
- Auto Control Function and can adjust timing to control.
- Show Connection Status and Serial USB data monitor. When not connect Arduino Board yet.(User Interface Disable.) When Arduino Board connected already. Then enable UI. and ready to Control.
- Publisher: Amphan
- Date: 03-04-2014
- Size: 740 KB
- Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
- IOIO Servo Motor PWM Control
- License: Freeware
- Price: 0.00

IOIO Servo Motor Control Application is allow you to control Servo Motor position.( 0 - 180 degree )
This App must connect to IOIO Board then control Servo Motor.
IOIO Board Connection can use in 2 methods.
1. Bluetooth Connection with USB Bluetooth Dongle.
2. USB Cable Connection.
The Application Features
- Control 0 - 180 Degree of Servo Motor position with progress bar , knob and Fixed degree.( PWM Output )
- Auto Control Function and can adjust timing to control.
- Show IOIO Connection Status. When not connect IOIO Board yet.(User Interface Disable.) When IOIO Board connected already.
- Publisher: Amphan
- Date: 28-08-2014
- Size: 909 KB
- Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
- IOIO Servo Controller
- License: Freeware
- Price: 0.00

Small app that acts to control a hobby servo's position via a slider bar in conjunction with a IOIO breakout board.
App defines pin outputs and implements slider for positioning. As coded, pin 10 on the IOIO board is set to PWM output.
Requires:
Android device (tested on Droid 2 w/ Froyo)
IOIO development board
Servo motor
- Publisher: Joseph Swanson
- Date: 12-02-2015
- Size: 56 KB
- Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
- EPICS MAXp
- License: Freeware
- Price: 0.00

A Linux driver and EPICS IOC for the Pro-Dex OMS MAXp. The MAXp is a 8 axis stepper/servo motor controller in PCI card form factor..
- Publisher: epicsmaxp.sourceforge.net
- Date: 14-07-2012
- Size: 26 KB
- Platform: Linux
- KisBus (Keep It Simple Bus)
- License: Freeware
- Price: 0.00

Keep It Simple Bus is a PC+MCU based Robotics Framework that utilizes serial port to interface to multiple DC/Servo/Stepper motors through PIC12F683 ising binary protocol. Main goal is to do it as cheap as possible with minimal number of components, fast.
- Publisher: kisbus.sourceforge.net
- Date: 07-10-2012
- Size: 18 KB
- Platform: WinOther
- mrsuite
- License: Freeware
- Price: 0.00

This project is a tool for developers on modular robotics. You can create modular robots, movements for each servo of the robot, simulate the robots. Also it has an API for creating your own Python scripts..
- Publisher: mrsuite.sourceforge.net
- Date: 12-07-2012
- Size: 723 KB
- Platform: Linux
- Open WebServo
- License: Freeware
- Price: 0.00

OpenWebServo is an Open Source Hardware and Software project. Its main goal is to develop a web-controlled servo system. The project includes web application, firmware and hardware design..
- Publisher: openwebservo.sourceforge.net
- Date: 03-07-2012
- Size: 2 KB
- Platform: Linux, Mac OS X, Unix, WinOther
- Quadrature Encoder Wheel
- License: Freeware
- Price: 0.00

This script prints quadrature encoder wheels, with an index, it can be edited to create any size wheel. This allows a computer to read the speed and direction of a rotating shaft, such as a servo motor..
- Publisher: quadwheel.sourceforge.net
- Date: 17-11-2012
- Size: 9 KB
- Platform: WinOther














