Software Listing: Mesh To Solid For Autocad

	Mesh To Solid for AutoCAD | License: Shareware |
	Mesh To Solid for AutoCAD is a polygon mesh to 3d solid conversion plug-in for AutoCAD. This plug-in gives AutoCAD the ability to convert a mesh into a solid. Mesh To Solid for AutoCAD adds several commands along with a menu which houses them. Meshes are often used to describe closed solid or open surface objects. However, general solid modeling software do not have methods to manipulate or modify mesh objects. Solid modeling operations such as boolean operations (add, subtract, intersect), extrude, offset, fillet, chamfer, rib, draft, shell, hollow, etc. are possible only with solid or surface objects. Publisher: SYCODE| Date: 29-06-2006 | Size: 2345 KB
	-

	Mesh Booleans for AutoCAD | License: Shareware |
	Mesh Booleans for AutoCAD is a mesh boolean modeling plug-in for AutoCAD®. Mesh Booleans for AutoCAD gives AutoCAD the ability to perform boolean operations between PolyFace Meshes, Polygon Meshes and 3D Solids or a combination of all. The geometry of a solid object can be described in AutoCAD as a 3D Solid, PolyFace Mesh or a Polygon Mesh entity. However, AutoCAD's solid modeling commands (Union, Subtract and Intersect) work with 3D Solids only. AutoCAD does not provide any commands to perform boolean operations on PolyFace Meshes and Polygon Meshes. Mesh Booleans for AutoCAD removes this limitation by adding new mesh modeling commands to AutoCAD that give AutoCAD the ability to perform boolean operations (add, subtract and intersect) between PolyFace Meshes, Polygon Meshes and 3D Solids or a combination of all. Publisher: SYCODE| Date: 07-09-2006 | Size: 2757 KB
	-

	Mesh To Solid | License: Shareware |
	Mesh To Solid is a software to convert a mesh into a solid. A mesh is a set of vertices connected by edges that describe triangular or quadrilateral faces. These faces describe the shape of the object that the mesh describes. Meshes are often used to describe closed solid or open surface objects. However, general solid modeling software do not have methods to manipulate or modify mesh objects. Solid modeling operations such as boolean operations (add, subtract, intersect), extrude, offset, fillet, chamfer, rib, draft, shell, hollow, etc. are possible only with solid or surface objects. Moreover, there is no way to convert a mesh into a solid so that the solid modeling operations can be carried out on it. Publisher: SYCODE| Date: 10-11-2006 | Size: 1605 KB
	-

	Mesh To Solid for Rhino | License: Shareware |
	Mesh To Solid for Rhino is a plug-in for Rhino 2.0 and 3.0. This plug-in gives Rhino to ability to convert a mesh into a solid. A mesh is a useful entity when it comes to defining geometry of an object. However, certain Rhino commands such as boolean operations, offset, extrusion, etc, cannot be performed on meshes. Moreover, Rhino does not export meshes to IGES, STEP, ACIS, ParaSolid, VDA and similar file formats, thereby rendering the mesh model useless for further solid modeling in another CAD system. Rhino imports STL, OBJ and other similar files as meshes only. If you need to modify these imported objects you need to convert them into solids. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 1400 KB
	-

	STL Export for AutoCAD | License: Shareware |
	STL Export for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to export geometric data to ASCII as well as binary Stereolithography (STL) files. AutoCAD already has a "STLOUT" command which exports STL files. But unfortunately it has some limitations. Firstly, it exports only 3D Solids and that too only one at a time. It does not export 3D Face, Polygon Mesh and Polyface Mesh entities which can very well be a part of a STL model. STL Export for AutoCAD addresses these issues. With STL Export for AutoCAD you can now export multiple 3D Solid, 3D Face, Polygon Mesh and Polyface Mesh entities to a single STL file. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	Terrain for AutoCAD | License: Shareware |
	Terrain for AutoCAD is a terrain modeling plug-in for AutoCAD. This plug-in gives AutoCAD the ability to create a terrain mesh from a set of unordered points, lines, polylines and splines. The terrain mesh is created as a Delaunay Triangulation, which is regarded as the best method to create a terrain mesh from unorganized point data. Terrain for AutoCAD can also import a set of points from a text file containing point coordinate data along with point numbers and point descriptions. Terrain for AutoCAD is powered by PointLib, a state of the art terrain modeling library developed by SYCODE. Terrain for AutoCAD is designed to be extremely user friendly and easy to use. Publisher: SYCODE| Date: 16-05-2006 | Size: 2396 KB
	-

	DXF Export for Solid Edge | License: Shareware |
	DXF Export for Solid Edge is an AutoCAD® DXF file export add-in for Solid Edge®. This add-in gives Solid Edge the ability to export 3D solid and surface data from a Solid Edge part or assembly document to 3D Polyface Meshes in an AutoCAD DXF file. DXF Export for Solid Edge tessellates the solid bodies in a Solid Edge part or assembly document into individual triangular meshes. These meshes are then exported to an ASCII DXF file as 3D Polyface mesh objects. The DXF file can then be imported into a variety of CAD applications. DXF Export for Solid Edge is very easy to use. Once installed, it automatically loads itself into Solid Edge and adds a new submenu called "DXF Export for Solid Edge" to the Solid Edge Applications menu. Publisher: SYCODE| Date: 23-11-2006 | Size: 1141 KB
	-

	OBJ Export for AutoCAD | License: Shareware |
	OBJ Export for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to export geometric data from AutoCAD to Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their .OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ Export for AutoCAD can export the following AutoCAD entities: 3D Face, Polygon Mesh, PolyFace Mesh and Solid. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	MeshWorks | License: Shareware |
	MeshWorks is an advanced mesh editing software built using the powerful MeshLib mesh library. With MeshWorks you can create, transform and modify meshes very easily. A mesh is usually created by exporting a solid model from another CAD system. Meshes created this way are very difficult to modify and sometimes the very nature of their geometry renders them useless for further processing. MeshWorks gives you the power to manipulate meshes so that you can alter their geometry and make them suitable to your needs.. Publisher: Floating Point Solutions Private Limited| Date: 15-08-2003 | Size: 1200 KB
	-

	PIX Import for AutoCAD | License: Shareware |
	PIX Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from PIX files. PIX files are the native file format of a digitizer software called Dr. Picza which comes bundled with Roland DG digitizers. PIX Import for AutoCAD gives AutoCAD the ability to import data from PIX files. You can import the data as points, lines, polylines, splines, faces, polyface mesh or polygon mesh. PIX Import for AutoCAD is very easy to use. It adds a new command to AutoCAD called "PIXIN". Simply type "PIXIN" at the AutoCAD command prompt and select a PIX file to import. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	3DS Import for Solid Edge | License: Shareware |
	3DS Import for Solid Edge is a 3D Studio (.3ds) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from 3DS files. 3DS Import for Solid Edge reads polygon mesh data stored in 3DS files and imports it into Solid Edge. A polygon mesh in a 3DS file is comprised of a set of triangular faces. 3DS Import for Solid Edge creates trimmed planar surfaces for each triangular face and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DS Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1216 KB
	-

	OBJ Import for Solid Edge | License: Shareware |
	OBJ Import for Solid Edge is a Wavefront (.obj) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from OBJ files. OBJ Import for Solid Edge reads polygon mesh data stored in OBJ files and imports it into Solid Edge. A polygon mesh in an OBJ file is comprised of a set of triangular and/or quad faces. OBJ Import for Solid Edge creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then OBJ Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1281 KB
	-

	3DM Import for Solid Edge | License: Shareware |
	3DM Import for Solid Edge is a Rhinoceros (.3dm) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from 3DM files. 3DM Import for Solid Edge reads polygon mesh data stored in 3DM files and imports it into Solid Edge. A polygon mesh in a 3DM file is comprised of a set of triangular and/or quad faces. 3DM Import for Solid Edge creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DM Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1304 KB
	-

	STL Import for Solid Edge | License: Shareware |
	STL Import for Solid Edge is a Stereolithography (.stl) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from ASCII and Binary STL files. STL Import for Solid Edge reads polygon mesh data stored in STL files and imports it into Solid Edge. A polygon mesh in a STL file is comprised of a set of triangular faces. STL Import for Solid Edge creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then STL Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1284 KB
	-

	DXF Export for SolidWorks | License: Shareware |
	DXF Export for SolidWorks is an AutoCAD® DXF file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to 3D Polyface Meshes in an AutoCAD DXF file. DXF Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to an ASCII DXF file as 3D Polyface mesh objects. The level of tessellation can be controlled by adjusting the resolution slider in the DXF Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces). Publisher: SYCODE| Date: 23-11-2006 | Size: 2089 KB
	-

	MeshWorks for Rhino | License: Shareware |
	MeshWorks for Rhino is a plug-in for Rhino. It adds a variety of mesh manipulation commands to Rhino. Some of the useful commands are given below: Hollow: This command hollows the mesh to a given wall thickness. Hollowing is particularly useful while preparing a model for Rapid Prototyping as it saves material, time and money while building a prototype. Offset: This command offsets a mesh to either shrink or expand it. PointsToMesh: This command creates a mesh from a set of points. Stitch: This command knits loosely tied faces of a mesh and attempts to make a mesh water-tight. FillHoles: This command adds faces to an existing mesh in order to fill any holes. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 3 KB
	-

	Solid Converter DWG to PDF | License: Shareware |
	Convert AutoCAD Drawings to PDFs with Solid Converter DWG Now your AutoCAD drawings are more usable than ever. Solid Converter DWG to PDF creates high-quality PDF files from DWG, DXF, and DXB drawings. Solid Converter DWG can convert files one at a time or in a batch, a significant time-saver. New in Version 2 of Solid Converter DWG! You can choose layouts or layers to convert, as well as control your PDF output colors. Layout options include current, Model, or Layouts Only. Layers can be selected by layer name or type. With PDF output options you can choose full color, grayscale, or black-and-white. Publisher: VoyagerSoft, LLC| Date: 23-06-2005 | Size: 11261 KB
	-

	progeSOFT IntelliCAD | License: Shareware |
	progeCAD IntelliCAD Includes AutoCAD DWG files, the files you work with everyday! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! Advanced Rendering Options, 3D ACIS Solid Modeling included. Import and edit your Raster Images, including Raster to Vector. Comes with near 10,000 standard symbols and blocks progeCAD 2006 Professional is an easy replacement for AutoCAD and AutoCAD LT! AutoCAD DWG File (2.5 - 2006) Open and Save Compatible with AutoCAD menus, scripts, fonts, etc. Compatible with AutoLISP, ADS, VBA and COM A Library of Blocks/Symbols for Electrical Mechanical Architectural Civil/Survey Hybrid DWG/Raster Image Editing Advanced Rendering 3D ACIS Solid Modeling Vertical applications for Mechanical (progeMEC) and Architectural (progeARC ArchT). Publisher: ICADSales.com| Date: 18-04-2006 | Size: 156230 KB
	-

	progeCAD 2006 Professional | License: Shareware |
	progeCAD IntelliCAD Includes AutoCAD DWG files, the files you work with everyday! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! Advanced Rendering Options, 3D ACIS Solid Modeling included. Import and edit your Raster Images, including Raster to Vector. Comes with near 10,000 standard symbols and blocks progeCAD 2006 Professional is an easy replacement for AutoCAD and AutoCAD LT! AutoCAD DWG File (2.5 - 2006) Open and Save Compatible with AutoCAD menus, scripts, fonts, etc. Compatible with AutoLISP, ADS, VBA and COM A Library of Blocks/Symbols for Electrical Mechanical Architectural Civil/Survey Hybrid DWG/Raster Image Editing Advanced Rendering 3D ACIS Solid Modeling Vertical applications for Mechanical (progeMEC) and Architectural (progeARC ArchT). Publisher: iCADsales.com| Date: 06-09-2006 | Size: 156230 KB
	-

	3DS Export for Solid Edge | License: Shareware |
	3DS Export for Solid Edge is a 3D Studio (.3ds) file export add-in for Solid Edge®. This add-in gives Solid Edge the ability to export 3D solid and surface data from a Solid Edge part or assembly document to 3d polygon meshes in a 3DS file. 3DS Export for Solid Edge tessellates solid bodies in a Solid Edge document into a set of triangular meshes. These meshes are then exported to a 3DS file as mesh objects. The 3DS file can then be imported into a variety of CAD applications. 3DS Export for Solid Edge is very easy to use. Once installed, it automatically loads itself into Solid Edge and adds a new submenu called "3DS Export for Solid Edge" to the Solid Edge Applications menu. Publisher: SYCODE| Date: 23-11-2006 | Size: 1157 KB
	-

	progeCAD 2008 Professional | License: Shareware |
	ProgeCAD IntelliCAD natively reads and writes AutoCAD DWG files, no need for conversion! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! Advanced Rendering Options, 3D ACIS Solid Modeling included. Import and edit your Raster Images, including Raster to Vector. Comes with near 10,000 standard symbols and blocks progeCAD 2008 Professional is an easy replacement for AutoCAD and AutoCAD LT! AutoCAD DWG File 2.5 - 2008 Open and Save Compatible with AutoCAD menus, scripts, fonts, etc. Compatible with AutoLISP, ADS, VBA and COM A Library of Blocks Symbols for Electrical Mechanical Architectural Civil Survey Hybrid DWG Raster Image Editing Advanced Rendering 3D ACIS Solid Modeling Vertical application for Civil Survey progeEARTH. Publisher: iCADsales.com| Date: 30-11-2007 | Size: 184000 KB
	-

	STL Import for AutoCAD | License: Shareware |
	STL Import for AutoCAD is a STL file import plug-in for AutoCAD 2000, 2000i, 2002 and 2004. STL Import for AutoCAD gives AutoCAD the ability to import geometric data from ASCII as well as binary Stereolithography (STL) files. The STL file format is the Rapid Prototyping industry's standard data transmission format and is the format required to interact with stereolithography machines. Stereolithography files contain solids which are made up of 3 sided facets. STL Import for AutoCAD converts these facets into a single AutoCAD PolyFace Mesh entity and adds it to the contents of the currently opened AutoCAD drawing. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	3DM Export for Solid Edge | License: Shareware |
	3DM Export for Solid Edge is a Rhinoceros (.3dm) file export add-in for Solid Edge®. This add-in gives Solid Edge the ability to export 3D solid and surface data from a Solid Edge part or assembly document to 3d polygon meshes in a 3DM file. 3DM Export for Solid Edge tessellates solid bodies in a Solid Edge document into a set of triangular meshes. These meshes are then exported to a 3DM file as mesh objects. The 3DM file can then be imported into a variety of CAD applications. 3DM Export for Solid Edge is very easy to use. Once installed, it automatically loads itself into Solid Edge and adds a new submenu called "3DM Export for Solid Edge" to the Solid Edge Applications menu. Publisher: SYCODE| Date: 23-11-2006 | Size: 1080 KB
	-

	OBJ Import for AutoCAD | License: Shareware |
	OBJ Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from ASCII Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their .OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ files contain solids which are made up of 3 or 4 sided faces. OBJ Import for AutoCAD converts these faces into a single AutoCAD PolyFaceMesh entity and adds it to the contents of the currently opened AutoCAD drawing. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	Point Cloud for AutoCAD | License: Shareware |
	Point Cloud for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD to ability to process point clouds. You can import a point cloud into AutoCAD as it is or fit a surface that passes through the points to recreate the original object. This is ideal for reverse engineering and GIS applications. There are different ways of fitting a surface depending on the nature of the point cloud. Point Cloud for AutoCAD also has the ability to compensate for probe diameter. There is an inherent error with probe based scanners since they digitize points at the center of the probe. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 800 KB
	-

	AutoCAD to PDF 2007.1 | License: Shareware |
	AutoCAD to PDF is a batch converter that allows you to convert AutoCAD DWG/DXF to PDF without the need of AutoCAD. Key Features: 1. Convert AutoCAD DWG and DXF files to vector PDF in batches. 2. Stand-alone utility - AutoCAD NOT required. 3. Supports every version of DWG/DXF files (Supports R2.5/2.6, R9, R10, R12, R13, R14, R2000/2002, R2004/2005/2006, 2007 formats) 4. Very easy to use. 5. Create and format PDF bookmarks. 6. Optimize PDF output settings for print, press or web. 7. Multiple options for use.. Publisher: AutoCAD to PDF| Date: 03-12-2006 | Size: 4243 KB
	-

	AutoCAD to PDF 2007 | License: Shareware |
	AutoCAD to PDF Converter is a batch converter that allows you to convert AutoCAD DWG/DXF to PDF without the need of AutoCAD. Key Features: 1. Convert AutoCAD DWG and DXF files to vector PDF in batches. 2. Stand-alone utility - AutoCAD NOT required. 3. Supports every version of DWG/DXF files (Supports R2.5/2.6, R9, R10, R12, R13, R14, R2000/2002, R2004/2005/2006, 2007 formats) 4. Very easy to use. 5. Create and format PDF bookmarks. 6. Optimize PDF output settings for print, press or web. 7. Multiple options for use.. Publisher: AutoCAD to PDF| Date: 27-09-2006 | Size: 4232 KB
	-

	TerrainCAD | License: Shareware |
	TerrainCAD is a terrain generation, editing and modeling software. Powered by TerrainLib, TerrainCAD employs blazing fast and robust algorithms to create and modify terrain meshes in no time. The capabilities of TerrainCAD can be broadly classified as (1) Terrain Generation, (2) Terrain Editing, and (3) Terrain Modeling Terrain Generation: TerrainCAD creates a terrain mesh from a set of unorganized survey points, breaklines and contours. The terrain mesh is created as a Delaunay Triangulation, which is regarded as the best method to create a terrain mesh from unorganized point data. TerrainCAD can also generate a terrain mesh directly from contours only. Publisher: SYCODE| Date: 13-09-2005 | Size: 2394 KB
	-

	AutoCAD to PDF Std | License: Shareware |
	AutoCAD to PDF is a batch converter that allows you to convert DWG to PDF, DXF to PDF without the need of AutoCAD. Key Features: 1. Convert AutoCAD DWG and DXF files to vector PDF in batches. 2. Stand-alone utility - AutoCAD NOT required. 3. Supports every version of DWG/DXF files (Supports R2.5/2.6, R9, R10, R12, R13, R14, R2000/2002, R2004/2005, ... formats) 4. Very easy to use. 5. Create and format PDF bookmarks. 6. Optimize PDF output settings for print, press or web. 7. Multiple options for use.. Publisher: autocad to pdf| Date: 28-05-2006 | Size: 3921 KB
	-

	AutoCAD to PDF | License: Shareware |
	AutoCAD to PDF is a batch converter that allows you to convert DWG to PDF, DXF to PDF without the need of AutoCAD. Key Features: 1. Convert AutoCAD DWG and DXF files to vector PDF in batches. 2. Stand-alone utility - AutoCAD NOT required. 3. Supports every version of DWG/DXF files (Supports R2.5/2.6, R9, R10, R12, R13, R14, R2000/2002, R2004/2005, ... formats) 4. Very easy to use. 5. Create and format PDF bookmarks. 6. Optimize PDF output settings for print, press or web. 7. Multiple options for use.. Publisher: autocad to pdf| Date: 04-09-2005 | Size: 3911 KB
	-

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 |