Software Listing: Hpgl Export For Solidworks

	PLT Export for SolidWorks | License: Shareware |
	PLT Export for SolidWorks is a HPGL Plot PLT file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export geometric data from a SolidWorks drawing document to a HPGL PLT file. PLT Export for SolidWorks reads curve data from a SolidWorks drawing document and converts it into corresponding pen movements in a HPGL Plot file. PLT Export for SolidWorks is very easy to use. Once installed, it automatically loads itself into SolidWorks and adds a new submenu called "PLTExport" to the SolidWorks menu. The 'PLTExport' menu consists of the following commands: # Export - Export objects to a PLT file # Help - Display the PLT Export for SolidWorks help file # Register - Register your copy of PLT Export for SolidWorks # About - Display the PLT Export for SolidWorks About box PLT Export for SolidWorks comes with detailed documentation for each command as well as a tutorial to get you started in the shortest possible time. Publisher: SYCODE| Date: 23-11-2006 | Size: 1128 KB
	-

	HPGL Export for SolidWorks | License: Shareware |
	HPGL Export for SolidWorks is a HPGL plot file export add-in for SolidWorks. This add-in gives SolidWorks the ability to export geometric data from SolidWorks drawings to HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: SYCODE| Date: 10-10-2005 | Size: 375 KB
	-

	HPGL Import for SolidWorks | License: Shareware |
	HPGL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from Hewlett Packard Graphic Language Plot files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	PLT Import for SolidWorks | License: Shareware |
	PLT Import for SolidWorks is a HPGL Plot (.plt) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from PLT files. PLT Import for SolidWorks reads pen movement data stored PLT files and imports it into SolidWorks. A HPGL PLT file is comprised of a set of instructions related to pen movements of HPGL plotters. PLT Import for SolidWorks reads these pen movement instructions and creates curve objects in a SolidWorks document. The curves can me created as a 3D Sketch in a part or assembly document or a 2D Sketch in a drawing document. PLT Import for SolidWorks is very easy to use as it adds new commands to SolidWorks. Publisher: SYCODE| Date: 23-11-2006 | Size: 1139 KB
	-

	OBJ Export for SolidWorks | License: Shareware |
	OBJ Export for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to export graphical data to ASCII Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ Export for SolidWorks tessellates the surfaces of a part and writes the triangular surfaces of the part to an OBJ file. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	DXF Export for SolidWorks | License: Shareware |
	DXF Export for SolidWorks is an AutoCAD® DXF file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to 3D Polyface Meshes in an AutoCAD DXF file. DXF Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to an ASCII DXF file as 3D Polyface mesh objects. The level of tessellation can be controlled by adjusting the resolution slider in the DXF Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces). Publisher: SYCODE| Date: 23-11-2006 | Size: 2089 KB
	-

	3DS Export for SolidWorks | License: Shareware |
	3DS Export for SolidWorks is a 3D Studio® 3DS file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to meshes in a 3DS file. 3DS Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to 3DS file as mesh objects. The level of tessellation can be controlled by adjusting the resolution slider in the 3DS Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces). Publisher: SYCODE| Date: 23-11-2006 | Size: 2220 KB
	-

	HPGL Export for Rhino | License: Shareware |
	HPGL Export for Rhino is a HPGL plot file export plug-in for Rhino. This plug-in gives Rhino the ability to export geometric data from Rhino to HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	NC Import for SolidWorks | License: Shareware |
	NC Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to convert tool movements in NC commands to corresponding lines and arcs in a SolidWorks 3D sketch. CNC Machines worldwide use Numeric Control files (.nc or .ncc) to convert programmed instructions to tool movement. NC programs consist of a sequence of codes with parameter data to arrive at a precise description of the toolpath. But the best of NC programmers also can make mistakes. NC Import for SolidWorks lets you import NC files into SolidWorks so that you can view the intended toolpath in 3D and create curves and surfaces directly from the toolpath. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	Points Import for SolidWorks | License: Shareware |
	Points Import for SolidWorks is a add-in for SolidWorks. This plug-in gives SolidWorks the ability to import points from text files. Points Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a point file select Open from the File menu. Select "Point Files (*.txt)" from the "Files of type" combo box and select a point file to import. A new part document will be created containing the imported points.. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	3DS Import for SolidWorks | License: Shareware |
	3DS Import for SolidWorks is a 3D Studio® (.3ds) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DS files. 3DS Import for SolidWorks reads polygon mesh data stored in 3DS files and imports it into SolidWorks. A polygon mesh in a 3DS file is comprised of a set of triangular faces. 3DS Import for SolidWorks creates trimmed planar surfaces for each triangle and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DS Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1190 KB
	-

	PIX Import for SolidWorks | License: Shareware |
	PIX Import for SolidWorks is a Dr. Picza (.pix) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from PIX files. PIX Import for SolidWorks reads surface and polygon mesh data stored in PIX files and imports it into SolidWorks. If the PIX file contains a scan of a surface PIX Import for SolidWorks creates a single trimmed surface describing the scanned surface. This surface can be converted into a solid by giving it a thickness. If the PIX file contains the scan information in the form of a polygon mesh PIX Import for SolidWorks creates a body describing the object that was scanned. Publisher: SYCODE| Date: 23-11-2006 | Size: 1194 KB
	-

	STL Import for SolidWorks | License: Shareware |
	STL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from ASCII as well as binary Stereolithography (STL) files. The STL file format has become the Rapid Prototyping industry's standard data transmission format and is the format required to interact with stereolithography machines. This format approximates the surfaces of a solid model with triangles. Stereolithography files contain solids which are made up of 3 sided facets. STL Import for SolidWorks reads these triangular surfaces and knits them into a solid in a new SolidWorks part document. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	3DM Import for SolidWorks | License: Shareware |
	3DM Import for SolidWorks is a Rhinoceros (.3dm) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DM files. 3DM Import for SolidWorks reads polygon mesh and curve data stored in 3DM files and imports it into SolidWorks. A polygon mesh in a 3DM file is comprised of a set of triangular/quad faces. 3DM Import for SolidWorks creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DM Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1314 KB
	-

	OBJ Import for SolidWorks | License: Shareware |
	OBJ Import for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to import graphical data from ASCII Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ files contain solids which are made up of 3 or 4 sided faces. OBJ Import for SolidWorks reads these surfaces and knits them into a solid in a new SolidWorks part document. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	HPGL Import for Rhino | License: Shareware |
	HPGL Import for Rhino is a plug-in for Rhino. This plug-in gives Rhino the ability to import graphical data from HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. HPGL plot files contain information regarding the movement of the pen of the HP plotter. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	HPGL Import for Surfcam | License: Shareware |
	HPGL Import for Surfcam is a plug-in for Surfcam. This plug-in gives Surfcam the ability to import graphical data from HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 300 KB
	-

	HPGL Import for IntelliCAD | License: Shareware |
	HPGL Import for IntelliCAD is a Hewlett Packard Graphics Language (HPGL) plot PLT file import plug-in for IntelliCAD powered applications. This plug-in gives IntelliCAD powered applications the ability to import geometric data from HPGL PLT files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. Publisher: SYCODE| Date: 30-11-2005 | Size: 920 KB
	-

	HPGL Import for AutoCAD | License: Shareware |
	HPGL Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	HatchKit | License: Demo |
	HatchKit v2.6 CAD Visual CAD Hatch Pattern Editor HatchKit provides a complete visual solution to your custom hatch pattern creation and modification requirements. HatchKit is also handy for inspecting hatch patterns. HatchKit supports all versions of AutoCAD, ACADLT, Alibre, AllyCAD, DataCAD, General CADD, IntelliCAD, MegaCAD, MicroStationV8, Revit, SolidWorks, Spirit, TurboCAD, VersaCAD or Visual CADD including verticals such as Autodesk Architectural Desktop. New in HatchKit 2.6 Object Snap within template and neighboring repeats Filename histories Measurement tool DXF ELLIPSE, POLYLINE and LWPLINE import Paste from Windows Clipboard Alibre, AllyCAD, DataCAD v10 and SPIRIT file formats Large scale Revit model patterns and much more. Publisher: Cadro Pty Ltd| Date: 22-10-2006 | Size: 1286 KB
	-

	2D / 3D CADViewX | License: Shareware |
	CADViewX is an AcitiveX library for viewing and printing AutoCAD DWG & DXF, HPGL, SVG and CGM files. The library also supports BMP, JPEG, windows metafile and GIF images. Powerful print, easy mouse wheel zoom and right-mouse-button padding are convenient features. The Print system is the same as in ABViewer software. The 'Tile' feature allows you to print the image onto any number of papers with any desired scale. Predefined sizes for standard formats (US: A, B, C, D, E; ISO-A, DIN: A4, A3, A2, A1, A0). Any 'tile' can be printed independently of other 'tiles', so if one page fails (e.g. printer problems) you can reprint just that page. Publisher: CADSoftTools| Date: 18-10-2005 | Size: 1282 KB
	-

	2D/3D CAD Import VCL | License: Shareware |
	CAD Import VCL is an easy-to-use API for using AutoCAD DWG, DXF, Hewlett-Packard HPGL, SVG and CGM file formats in Delphi/C++Builder applications.    Main CAD Import VCL features:    - CAD extentions: *.dwg; *.dxf; *.plt; *.hgl;*.hg;*.hpg; *.plo;*.hp;*.hp1; *.hp2;*.hpgl; *.hpgl2;*.gl2;*.prn;*.spl  - Capability to add the following extentions: *.tif;*.tiff;*.fax; *.bw;*.rgb;*.rgba; *.sgi;*.cel;*.pic;*.tga; *.vst; *.icb;*.vda;*.win;*.pcd;*.ppm;*.pgm; *.pbm;*.cut; *.pal;*.rla; *.rpf;*.psd;*.pdd;*.psp; *.png *.rle;*.dib; *.ico;*.emf;*.wmf;*. Publisher: CADSoftTools| Date: 30-05-2006 | Size: 7933 KB
	-

	ABViewer | License: Shareware |
	Professional image viewer, editor and converter. ABViewer is a multi-purpose viewer and converter. ABViewer supports DWG (2.5 - 2007/2008), DXF, TIFF, SVG, CGM, HGL, PLT, SPL, HG, HPG, PLO, PCX, BMP, JPG, JPEG, WMF, etc.    ABViewer converts all supported files to BMP, EMF, JPEG, GIF, TIFF formats. It allows you to drag images, zoom in, zoom out, centering, printing. Advanced printing allows you to print one image to many sheets of paper as "tiles" to glue together afterwards.    Key features:  - Edit/View/Convert AutoCAD DWG/ DXF, HPGL PLT/HGL/PRN/SPL/HG, SVG, CGM, BMP, Tiff and many other file formats. Publisher: CADSoftTools| Date: 21-03-2008 | Size: 4005 KB
	-

	2D/3D CAD Viewer: DXF DWG PLT CGM SVG | License: Shareware |
	Professional image viewer for industry and home usage. ABViewer is a multi-purpose viewer and converter. ABViewer supports DWG (9 - 2004 / 2006), DXF, TIFF, SVG, CGM, HGL, PLT, HG, HPG, PLO, PCX, BMP, JPG, JPEG, WMF, etc. ABViewer converts all supported files to BMP, EMF, JPEG, GIF, TIFF formats. It allows you to drag images, zoom in, zoom out, centering, printing. Advanced printing allows you to print one image to many sheets of paper as "tiles" to glue together afterwards. Key features: - DWG DXF Arcs and Circles can be drawn as smooth curves and saved to EMF as Metafile - Arcs and Ellipses can be zoomed after pasting to MS Word without quality loss. Publisher: CADSoftTools| Date: 30-05-2006 | Size: 2840 KB
	-

	2D CAD View Plugin for Total Commander | License: Shareware |
	CAD View Plugin for Total Commander Free for home using! CAD View Plugin provides support for DWG / DXF / HPGL files in Total Commander. Features: - Fast reading - 2D / 3D graphic - Mouse wheel zoom - Pan. Publisher: Soft Gold Ltd| Date: 02-12-2004 | Size: 353 KB
	-

	PLT Import for AutoCAD | License: Shareware |
	PLT Import for AutoCAD is a HPGL Plot (.plt) file import plug-in for AutoCAD®. This plug-in gives AutoCAD the ability to import geometric data from ASCII and Binary PLT files. PLT Import for AutoCAD reads pen movement data stored PLT files and imports it into AutoCAD. A HPGL PLT file is comprised of a set of instructions related to pen movements of HPGL plotters. PLT Import for AutoCAD reads these pen movement instructions and creates curve objects in the active AutoCAD drawing. PLT Import for AutoCAD supports the following HP plotters: Hewlett-Packard 7475A Hewlett-Packard 7550A Hewlett-Packard 7580B Hewlett-Packard 7585B Hewlett-Packard 7586B Hewlett-Packard Draftmaster 1 (7595A) Hewlett-Packard Draftmaster 2 (7596A) Hewlett-Packard Draftpro (7570A) Hewlett-Packard Draftpro-DXL (7575A) Hewlett-Packard Draftpro-EXL (7576A) PLT Import for AutoCAD is very easy to use. Publisher: SYCODE| Date: 16-05-2006 | Size: 2422 KB
	-

	BMP to DXF | License: Shareware |
	BMP to DXF is a stand-alone program that converts images (BMP, JPG, TIF, GIF, etc) into AutoCAD formats (such as DXF, HPGL, etc) for editing in any CAD application. Key Features: a. Input image formats: BMP, JPG, TIF, GIF, PNG, PCX, TGA, RLE, JPE, J2K, JAS, JBG, MNG and more. b. Output formats: DXF, HPGL, and others. c. Outline solid raster areas. d. Create center lines and outlines. e. Scale images in the X and Y directions to make them larger or smaller. f. Color, Gray and black-and-white images vectorization. g. Tracing raster lines, arcs, circles, arrow lines, dash lines, polylines, hatches on monochrome, grayscale or color images. Publisher: Img2cad, Inc.| Date: 23-08-2005 | Size: 525 KB
	-

	PDF to Vector Converter Command Line Server License | License: Shareware |
	VeryDOC PDF to Vector Converter (PDF2Vector) can be used to batch convert from Acrobat PDF files to other scalable vector graphics formats, such as EMF, WMF, SVG, Postscript (PS), EPS, SWF (Flash), XPS, HPGL, PCL etc. The software can be run using the handy interface or in batch mode to convert large volumes of PDF files in real-time. VeryDOC PDF to Vector Converter is a standalone software, Adobe Acrobat and Adobe Reader NOT required! VeryDOC PDF to Vector Converter (PDF2Vector) Key Features: 1. VeryDOC PDF to Vector Converter is a standalone software, Adobe Acrobat and Adobe Reader NOT required! 2. Publisher: verypdf.com Inc| Date: 28-05-2007 | Size: 7746 KB
	-

	PDF to Vector Converter Command Line Developer License | License: Shareware |
	VeryDOC PDF to Vector Converter (PDF2Vector) can be used to batch convert from Acrobat PDF files to other scalable vector graphics formats, such as EMF, WMF, SVG, Postscript (PS), EPS, SWF (Flash), XPS, HPGL, PCL etc. The software can be run using the handy interface or in batch mode to convert large volumes of PDF files in real-time. VeryDOC PDF to Vector Converter is a standalone software, Adobe Acrobat and Adobe Reader NOT required! VeryDOC PDF to Vector Converter (PDF2Vector) Key Features: 1. VeryDOC PDF to Vector Converter is a standalone software, Adobe Acrobat and Adobe Reader NOT required! 2. Publisher: verypdf.com Inc| Date: 28-05-2007 | Size: 7746 KB
	-

	Image2DXF | License: Shareware |
	Image2DXF is a stand-alone program that converts images (BMP, JPG, TIF, GIF, etc) into AutoCAD formats (such as DXF, HPGL, etc) for editing in any CAD application. Key Features: a. Input image formats: BMP, JPG, TIF, GIF, PNG, PCX, TGA, RLE, JPE, J2K, JAS, JBG, MNG and more. b. Output formats: DXF, HPGL, and others. c. Outline solid raster areas. d. Create center lines and outlines. e. Scale images in the X and Y directions to make them larger or smaller. f. Color, Gray and black-and-white images vectorization. g. Tracing raster lines, arcs, circles, arrow lines, dash lines, polylines, hatches on monochrome, grayscale or color images. Publisher: Img2cad, Inc.| Date: 26-05-2005 | Size: 529 KB
	-

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |