Software Listing: Geodetic

  • Translev
  • License: Freeware
  • Price: 0.00
  • Rating

This program facilitates the process of edtiting, formatting and checking digital leveling observation data and creates abstracts, bok files, and VERTOBS datasets for submission to the National Geodetic Survey (NGS). The program includes many built-in functions such as predicting temperature differences, refaction corrections, rod corrections and plotting. Also included are routines for editing *.lvl files and VERTOBS files..

  • Platform: WinOther

Predict the azimuth and elevation of the Sun within +/- 1 degree at any geodetic latitude, longitude and altitude. Function Call: [Az El] = SolarAzEl('2008/02/18 13:10:00',60,15,0) Input List: UTC Date and Time - Use format YYYY/MM/DD hh:mm:ss Latitude - Site Latitude in degrees -90:90 -> S(-) N(+) Longitude - Site Longitude in degrees -180:180 W(-) E(+) Altitude - Site Altitude in km Output List: Az - Solar Azimuth angle in degrees El - Solar Elevation/Altitude Angle in degrees.

  • Platform: Matlab, Scripts

A collection of geodetic functions that solve a variety of problems in geodesy. Supports a wide range of common and user-defined reference ellipsoids. Most functions are vectorized. Functions include: Angle Conversions deg2rad - Degrees to radians dms2deg - Degrees,minutes,seconds to degrees dms2rad - Degrees,minutes,seconds to radians rad2deg - Radians to degrees rad2dms - Radians to degrees,minutes,seconds rad2sec - Radians to seconds sec2rad - Seconds to radians Coordinate Conversions ell2utm - Ellipsoidal (lat,long) to UTM (N,E) coordinates ell2xyz - Ellipsoidal (lat,long) to Cartesian (x,y,z) coodinates sph2xyz - Shperical (az,va,dist) to Cartesian (x,y,z) coordinates xyz2sph - Cartesian (x,y,z) to spherical (az,va,dist) coordinates xyz2ell - Cartesian (x,y,z) to ellipsoidal (lat,long,ht) coordinates xyz2ell2 -...

  • Platform: Matlab, Scripts

It performs transformations of geodetic coordinates from one ellipsoid to another using 7 datum parameters. It is also called Helmert 7 parameters transformation or datum transformation (in geodesy and cartography)..

  • Platform: Matlab, Scripts

GeoDLL supports the development of geodetic software on various platforms by providing geodetic functions. GeoDLL contains precise calculations on the themes 2D and 3D coordinate transformation, geodetic datum shift and reference system converting, meridian strip changing, user defined coordinate and reference systems, distance calculations, Digital Elevation Model, NTv2 handling and BeTA2007 support, Direct / Inverse solutions, map function and geodetic converting functions. The most important application of GeoDLL is to include professional coordinate transformations in own programs. These coordinate and reference systems are supported: 1.

  • Platform: Win2000, Win7 x32, Win7 x64, Windows Mobile, Windows Server, WinOther, WinVista, WinVista x64

GeoDLL supports the development of geodetic software on various platforms by providing geodetic functions. GeoDLL contains precise calculations on the themes 2D and 3D coordinate transformation, geodetic datum shift and reference system converting, meridian strip changing, user defined coordinate and reference systems, distance calculations, Digital Elevation Model, NTv2 handling and BeTA2007 support, Direct / Inverse solutions, map function and geodetic converting functions. The most important application of GeoDLL is to include professional coordinate transformations in own programs. These coordinate and reference systems are supported: 1.

  • Platform: Win2000, Win7 x32, Win7 x64, Windows Mobile, Windows Server, WinOther, WinVista, WinVista x64

GeoDLL supports the development of geodetic software on various platforms by providing geodetic functions. GeoDLL contains precise calculations on the themes 2D and 3D coordinate transformation, geodetic datum shift and reference system converting, meridian strip changing, user defined coordinate and reference systems, distance calculations, Digital Elevation Model, NTv2 handling and BeTA2007 support, Direct / Inverse solutions, map function and geodetic converting functions. The most important application of GeoDLL is to include professional coordinate transformations in own programs. These coordinate and reference systems are supported: 1.

  • Platform: iOS 4.x, Mac OS X, Palm OS, Pocket PC, Unix, Win2000, Win7 x32, Win7 x64, Windows CE, Windows Mobile, Windows Server, Windows Vista, WinOther, WinVista, WinVista x64

WinDesc is a handy program designed for creating, editing, and formatting the files that include geodetic descriptions. The user can create a new description file and enter all the data from the keyboard.

The program can assist you in creating a new project by providing the standard information in drop-down lists.


.

  • Platform: WinOther
  • GEODLL32
  • License: Shareware
  • Price: 290.00
  • Rating

In the Dynamic Link Library GeoDLL geodesic functions like coordinate transformation, reference system changes, meridian strip changes, user defined coordinate and reference systems, distance calculation, maps functions and more geodesic functions are contained to bind them into own applications. The DLL is delivered with interface source codes to many programming languages. WINDOWS operating system allows building of function libraries intended for use by applications, the so-called Dynamic Link Libraries. The application uses functions stored in the DLL by making a DLL call. The language used for developing applications that call functions of the DLL is not important.

  • Platform: Win2000, Windows CE, Windows Server, WinOther

The program produces a set with seven parameters of the sapatial Helmert transformation valid for an specific area, with which then arbitrary coordinates of the area can be transformed from one reference system into another with high accuracy. The seven transformation parameters are computed with a set of individual identical points. Those are points with known coordinates in both reference systems. For the computation at least three identical points must be present. In practice you will be anxious to use more identical points than those three necessities. Cartesian coordinates or geographical coordinates with ellipsoidal height using the ellipsoid dimensions are suitable.

  • Platform: Win2000, Windows CE, Windows Server, WinOther

TRANSDAT Geosoftware executes coordinate transformations and geodetic datum shifts between many coordinate and reference systems of Germany, Europe, America, Australasia and world-wide, at high precision and high speed: 1.The current and many historical coordinate and reference systems of all countries of the European Union (EU) including the eastern extensions from 2004 and 2007 and the systems of the European non-EU countries. 2. The US and Canadian State Plane Coordinate Systems (SPCS) on NAD27 and NAD83 and other coordinate and reference systems of the North American continent. 3. The coordinate and reference systems of the Australasian continent.

  • Platform: Tablets, Win2000, Windows Server, Windows Vista, WinOther

JAG3D is a tool to estimate geodetic 1d, 2d and 3d-networks by a least-square-adjustment called GauAz-Markov-Model. Moreover, the software supports deformation-analysis. Add-ons are coordinate-transformation (CoordTrans) or the Form-Fitting-Toolbox..

  • Platform: Linux, Mac OS X, WinOther

Rocinante is the GNU GaMa GUI for the adjustment of geodetic networks in local coordinate systems (stable branch) and is based on the Qt graphical library. The Qt graphical library enables Rocinatnte to be available for Linux and Windows.Information.

  • Platform: Linux, Unix, WinOther

SteelBreeze is a software for data processing of geodetic Very Long Baseline Interferometry (VLBI) observations. It estimates geodynamics parameters (Earth Rotation Parameters (EOP), coordinates of stations and sources, etc.) using Least Square Method..

  • Platform: Linux, Unix

NGRAV computes the normal gravity value (in m/sec^2 unit) of a point with the geodetic latitude defined in GRS80 ellipsoid,which is the more up-to-date and internationally adopted reference ellipsoid. The normal gravity value is used for the computation of the gravity anomaly which removes the effect caused by the Earth oblateness and centrifugal acceleration from the observed gravity value and which is used frequently in geophysics and geodesy for the physical interpretation of the gravity accelerations and for the solution of the boundary value problems. The computation depends on a very simple equation;the Somigliana's formula.

  • Platform: Matlab, Scripts

In 1975, Vincenty published a rapidly converging algorithm for computing the distance between points on an ellipsoidal earth. The algorithm is precise to within a few millimeters. Since then, his algorithm has since seen significant implementation in geodesy and engineering. After adjusting the algorithm to converge in all cases (the original suffers from convergence failure in a few outlying cases), I have provided it here in MATLAB form. The function itself does not require the Mapping Toolbox, but I have included a (commented-out) code section following the body of the function, which you can use if you have the Mapping Toolbox to compare the accuracy of this algorithm to spherical earth distances.

  • Platform: Matlab, Scripts
  • HEIMDALL
  • License: Freeware
  • Price: 0.00
  • Rating

HEIMDALL, short for High-End Interface for Monitoring and spatial Data Analysis using L2-Norm, is a set of public libraries written in JAVA which contains routines and algorithms for geodetic hardware connection. To observe objects (in general spatial points) continuous, HEIMDALLa€™s programmable logic arrays can be used to design monitoring systems. For data analysis an interface to the least-squares program JAG3D can be provided. The serial communication with e.g. inclination sensors, meteorological stations or total stations is handled by the library RXTX. If only a proprietary communication via dynamic-link library (dll are not shared by the project) is supported by the devices, JNA is resorted.

  • Platform: WinOther

SEVENPAR is a tool for the calculation of highly exact transformation parameters for the Spatial Helmert and Molodensky Transformation, which make possible precise coordinate transformations from one reference system into another. The determined transformation parameters can be entered directly into suitable transformation software, e.g. TRANSDAT Coordinate Transformations, or into the calculation software of GPS receivers to do exact coordinate transformations. The seven or three transformation parameters are computed with a set of individual identical points. Those are points with known coordinates in both reference systems (geodetic datum).

  • Platform: Tablets, Win2000, Win7 x32, Win7 x64, Windows CE, Windows Mobile, Windows Server, Windows Vista, WinOther, WinVista, WinVista x64

For the implementation of the INSPIRE directive all so far in Germany available geo references with Gauss-Krueger / DHDN coordinates now must be converted to UTM / ETRS89 coordinates for future use. BetaDLL supports the development of geodetic software on various platforms for this transformations by providing geodetic functions. BetaDLL contains precise functions for coordinate transformations and datum shifts using the German NTv2 standard BeTA2007. The Functions can be easy called from own applications. Coordinate systems supported by BetaDLL: UTM coordinates (northern hemisphere); Gauss-Krueger coordinates(3 degrees wide strips); Geographic coordinates (Greenwich) [deg,min,sec]; Geographic coordinates (Greenwich) [deg].

  • Platform: iOS 4.x, Mac OS X, Palm OS, Pocket PC, Win2000, Win7 x32, Win7 x64, Windows CE, Windows Mobile, Windows Server, Windows Vista, WinOther, WinVista, WinVista x64

For the implementation of the INSPIRE directive all so far in Germany available geo references with Gauss-Krueger / DHDN coordinates now must be converted to UTM / ETRS89 coordinates for future use. BetaDLL supports the development of geodetic software on various platforms for this transformations by providing geodetic functions. BetaDLL contains precise functions for coordinate transformations and datum shifts using the German NTv2 standard BeTA2007. The Functions can be easy called from own applications. Coordinate systems supported by BetaDLL: UTM coordinates (northern hemisphere); Gauss-Krueger coordinates(3 degrees wide strips); Geographic coordinates (Greenwich) [deg,min,sec]; Geographic coordinates (Greenwich) [deg].

  • Platform: Tablets, Win2000, Win7 x32, Win7 x64, Windows CE, Windows Server, WinOther, WinVista, WinVista x64

Page: 1 | 2 | 3 | 4 | Freeware

New Reviews


SD QuickExec

Im always scouting the internet looking for quality applications that’ll help me save time carrying out some of the basic things I do every time I switch on my computer. For example, launch my internet browser, email client, iTunes and so on. ...


Vehicles 2

Vehicles 2 is a great example of innovation in a game, from the very beginning cut scene (which explains the general back story to the game in a very light, humorous way) to the gameplay style, it has a lot of influence from other games in the ...


Soft4Boost Disk Cleaner

Soft4Boost Disk Cleaner is a really easy program to use. There are thousands of different applications out there, free and paid, that try and remove junk from your system to help improve speed and overall system performance. Soft4Boost Disk Cleaner ...


Access Controller

Access Controller is an application that helps secure your computer desktop whilst your away from it. When you're away from your computer, you can enable Access Controller so that a password is required to unlock your desktop and continue ...


Glary Utilities

Glary Utilities is another one of the thousands of different applications out there that helps you clear out and fine tune your system, for better and improved system speed and performance... and its a decent one too!

Glary Utilities ...


Intergalactic War

Inter galactic war is another free ware two dimensional shooter game, falling into the ever prevalent genre of top down shooters. As the title suggests, in inter galactic war you play as a space ship fighting enemy space ships as you fight your way ...


Screen Resolution Manager

If you share a computer at home or at work, some users may their own have personal preferences regarding the screen resolution that your monitor or projector is set up, and the colors that are displayed. This could be because of bad eye sight, ...


WinXP Manager

WinXP Manager is the tool letting you easily change and personalize your Windows XP based system. Its the edition of the tool released by Yamicsoft for Windows XP only, and is similar to Vista Manager and Windows 7 Manager, designed for later ...


WinLock

WinLock is a program that helps users lock down and limit access to certain functions of a Windows PC. Applications such as WinLock are crucial in environments where public access is allowed to PC’s, such as libraries or internet cafes, as ...



New Downloads

Exchange GroupCalendar

Improve your team calendars in
outlook by making them show
only relevant information.
What if you had company wide
...

Driver Genius

Driver Genius manage your PC
to get 100% up to date drivers
and optimize PC performance.

WebTweakTools Bundle

Web site link checker, html
checker, spell checker and
site inspector in one bundle.
It begins checking from the
starting ...

QIF2OFX

Finally, the solution to
import your transactions.
Convert QIF to OFX and import
into MS Money, Sage One, Xero,
YNAB, ...

DiskBoss Pro

DiskBoss Pro is an automated,
rule-based file and disk
management solution allowing
one to perform various types
of file ...

Tweddo for Mac

Tweddo is a feature-rich batch
photo editor for restoration
and enhancement of photo
archives, and all your basic
image ...

rEASYze

Elegant and portable, this
application takes a fresh
approach image resizing.
Packed in a dark-themed
interface, it can ...

Gmagon CSS Maker

Gmagon CSS Maker minimizes
your time and efforts spent on
creating complex CSS styles.
With this handy generator, you
can ...

Auto FTP Manager

Auto FTP Manager is a powerful
secure FTP client. Schedule
FTP transfers to happen
automatically. Automated
Transfers ...



Related Searches

Free Geodetic Software Downloads