Software Listing: Gearing
- MITCalc - Bevel Gearing
- License: Shareware

MITCalc - Bevel Gearing helps with geometric design and strength check of bevel gear with with straight, helical and curved toothing.
Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
· Calculation of straight, helical and curved toothing.
· Automatic design of a transmission with the minimum number of input requirements.
· Design for entered coefficients of safety (static, dynamic).
· Calculation of complete geometric parameters (including corrected toothing).
- Publisher: MITCalc
- Date:
- Platform: WinOther
- MITCalc - Planetary Gearing
- License: Shareware

MITCalc - Planetary Gearing will help you perform geometric design and strength checking of spur gears with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.
The calculations use procedures, algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature. Used standards: ISO 6336, ISO 1328, DIN 3990, ANSI B6.1-1968, AGMA 2001-C95, AGMA 2001-D04, AGMA 908-B89/95 and others.
.
- Publisher: MITCalc
- Date:
- Platform: WinOther
- MITCalc - Spur Gearing
- License: Shareware

The calculation is designed for geometric and strength design and check of spur gearing with straight and helical toothing. The application provides solutions for the following tasks. Calculation of helical and straight toothing (external / internal). Automatic design of a transmission with the minimum number of input requirements. Design for entered coefficients of safety (static, dynamic). Calculation of complete geometric parameters (including corrected toothing). Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength...).
- Publisher: MITCalc
- Date: 09-06-2012
- Size: 3277 KB
- Platform: WinOther
- MITCalc - Internal Spur Gears
- License: Shareware

MITCalc - Internal Spur Gears is an Excel spreadsheet built for geometric design and check of spur gearing with straight and helical toothing.
The calculations use procedures, algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature.
.
- Publisher: MITCalc
- Date:
- Platform: WinOther
- DDH
- License: Freeware
- Price: 0.00

A Differential Dividing Head (hence DDH) creates the possibility of large numbers of divisions by using gearing to move the hole plate at some fraction of the spindle rotation. This program aids in determining which gears are required for a given number of divisions..
- Publisher: myvirtualnetwork.com
- Date:
- Size: 40 KB
- Platform: WinOther
- MITCalc Planet Gear Calculation
- License: Shareware
- Price: 44

Geometric design and strength check of planetary gearing with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.
- Publisher: MITCalc
- Date: 11-07-2017
- Size: 3972 KB
- Platform: Win2000, WinXP, Win7 x32, Win7 x64, Windows 8, Windows 10, WinServer, WinOther, Windows2000, Windows2003, Windows Server 2012, Windows Tablet PC Edition 2005, Windows Media Center Edition 2005, WinVista, Windows Vista, WinVista x64
- Race Driver
- License: Shareware
- Price: 99

Race driver and race car management for auto racing, karting and 4WD. Track all your sessions - practice, qualifying, or a race - and save data on tire temps, tire pressures, oil, water, gearing and shock/spring settings. Ideal for multi-car teams. For each session, it tracks your competitors and what they are turning in lap times and also shows how you practiced, qualified and raced at each venue. Ships with a Report Wizard..
- Publisher: LanSharks
- Date: 26-01-2002
- Size: 4426 KB
- Platform: WinOther
- MITCalc - Planet Gear Calculation
- License: Shareware

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.
- Publisher: MITCalc
- Date: 15-09-2008
- Size: 1941 KB
- Platform: Tablets, Win2000, Windows Server, Windows Vista, WinOther
- MITCalc - Internal Spur Gear Calculation
- License: Shareware
- Price: 24.00

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (internal). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.
- Publisher: MITCalc
- Date: 21-05-2011
- Size: 2617 KB
- Platform: Win2000, WinOther
- MITCalc - Worm Gear Calculation
- License: Shareware
- Price: 36.00

Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of gearing dimensions. - Automatic transmission design with minimum input requirements. - Design for safety coefficients entered. - Calculation of a table of proper solutions. - Calculation of complete geometrical parameters. - Calculation of strength parameters, safety check. - Gearing design for precise centre-line distance. - Auxiliary calculations (heating, shaft design). - Support of 2D and 3D CAD systems.
- Publisher: MITCalc
- Date: 27-07-2012
- Size: 1935 KB
- Platform: WinOther
- TinyQuest
- License: Freeware
- Price: 0.00

In short TinyQuest will be a sim-like game. Adventurers will be running around, picking up quests, leveling & gearing up, exploring new terretories and so on..
- Publisher: maxengine.sourceforge.net
- Date: 11-06-2012
- Size: 18 KB
- Platform: WinOther
- Monopod Hopper
- License: Shareware

Monopod hopper Ground model dlTA Normal compliance model dlTA Friction force model Actuation model dlTA Model of brushed DC motors dlTA Ball screw and gearing models dlTA Springs and dampers Robot model and dynamics calculation routines Energy calculation unit Animations: <!--dp_youtube_begin:http://www.youtube.com/watch?v=yNZ323NqTo0--><object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/yNZ323NqTo0&hl=ru&fs=1"></param><param name="wmode" value="transparent" /><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.
- Publisher: Pouyan Taghipour Bibalan
- Date: 18-02-2013
- Size: 51 KB
- Platform: Matlab, Scripts
- GEARING
- License: Freeware
- Price: 0.00

Marv Windecker sent along a clever program for calculating variables associated with a gear driven vehicle. Enter any four of the following variables: axle ratio, engine rpm, vehicle speed, tire diameter, overdrive ratio. The program will then compute the unknown value..
- Publisher: myvirtualnetwork.com
- Date:
- Size: 30 KB
- Platform: WinOther
- Forza Tune Calculator
- License: Freeware
- Price: 0.00

Partial port of FEUERDOG's and Slave Munkeys spreadsheets used for in depth tuning in Forza3 and Forza4.
Features include:
Forza 3 and Forza 4 tunes
Imperial and Metric support
Suspension, differential and gearing results
Tunes for Grip/Normal/Drift
Save tunes to phones storage for editing anytime
v2.81 changelog
Sep DLC
v2.80 changelog
Added 1973 Porsche 911
Fixed ZL1 specs
v2.79 changelog
August DLC
v2.78 changelog
July DLC
v2.77 changelog
June DLC
v2.76 changelog
Porsche DLC
2013 Viper DLC
Help screen including where to find required values in game and tips.
- Publisher: Will Sykes
- Date:
- Size: 1024 KB
- Platform: Windows Phone, WinMobile
- Racing Rider
- License: Shareware
- Price: 0.99

Create and customize your riding style riding your bike, following the advice of Lorenzo Alfonsi and technical edge with respect to the setting, gearing, gear to use in the individual curves of the most prestigious circuits of the world:
Assen
Brno
Imola
Misano
Monza
Mugello
Nurburgring
Valencia
Vallelunga
Recommendations for trajectories, the most important secrets for precious seconds off collected in this wonderful app created just for you.
-DISCLAIMER-
This App provides recommendations based on experience of Lorenzo Alfonsi on the circuit as a professional pilot.
- Publisher: Riccardo Cappello
- Date:
- Size: 1024 KB
- Platform: Windows Phone, WinMobile
- FixedGears
- License: Freeware
- Price: 0.00

FixedGears is a gear calculator for riders of single-speed and fixed-gear bikes. It calculates gearing for various chainring and cog sizes, cadence, speeds, skid patches (1- or 2-leg), alternate gearing (real).
Suggestions? Send 'em!
Note: Current app version uses English locale (i.e. it uses a dot as a decimal separator) even if you choose a non-English locale (i.e. one that uses a comma as a decimal separator).
Tablet-capable! App tested on Nexus 7 and Android 4.4.2 Kit Kat.
.- Publisher: midtoad
- Date: 03-11-2014
- Size: 87 KB
- Platform: Android 1.x, Android 2.x, Android 3.x, Android 4.4, Android 4.x
- TwitchRC: RC Car Gearing/Tekin
- License: Shareware
- Price: 2

Twitch RC: RC Car Setup, Tekin RS (Pro) Tuning
The Must Have app for Tekin RS Users!
I was sick of entering the same information over and over into my phone.... 3.14 * pinion, or was it spur, over spur, or was it pinion... maybe times my internal ratio... only to do it over again for a couple of teeth more or less trying to get the FDR someone else was running...
Twitch Rc Provides the following key features
* FDR and Rollout available all the time,
* +/- pinion/spur to quickly hunting through options (using volume control)
* With the tire diameter and spur set, enter a Rollout or FDR to calculate required pinion.
- Publisher: Evolve Software
- Date: 09-01-2014
- Size: 41 KB
- Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
- BMX Gear Ratio Calculator
- License: Freeware
- Price: 0.00

Fine tune your BMX gearing, and experiment with different chainring and sprocket combinations for optimum performance.
This handy and easy to use app enables you to calculate the gear ratio, in standard gear inches, for any given chainring, rear sprocket, and rear wheel and tyre size combinations. It also lets you see which other chainring and sprocket size combinations come closest for all the different chainring sizes listed (20T to 49T), making comparisons of different set ups a piece of cake and giving you valuable insight into the impact of different configurations.
.- Publisher: West Coast Web Works
- Date: 26-08-2014
- Size: 206 KB
- Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
- Yamaha R6 Gear Ratio Pro
- License: Freeware
- Price: 0.00

Ratio Pro for the Yamaha YZF-R6 is a quick and useful tool for racers and track day goers alike. Gear ratios are crucial to racing and R6 Ratio Pro allows you to select the optimal gearing for any track.
This calculator that lets you select sprocket and tire dimensions to see the effect they will have on top speed and RPM in each gear. This app lets you save sessions with your gearing/tire data along with track, times, weather and setup notes for later reference and comparison. Graphs of selected gear ratio and drop in RPM when shifting are also available for a quick visual reference of all data.
- Publisher: Little Big Racing
- Date: 18-03-2015
- Size: 2150 KB
- Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
- MITCalc Spur Gear Calculation
- License: Shareware
- Price: 44

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.
- Publisher: MITCalc
- Date: 11-07-2017
- Size: 4834 KB
- Platform: Win2000, WinXP, Win7 x32, Win7 x64, Windows 8, Windows 10, WinServer, WinOther, Windows2000, Windows2003, Windows Server 2012, Windows Tablet PC Edition 2005, Windows Media Center Edition 2005, WinVista, Windows Vista, WinVista x64


















