Freeware Listing: Simulink
- Using S-Parameters in MATLAB & Simulink
- License: Freeware

A sequence of examples is provided that demonstrate how S-parameter measurements can be made and utilized to design a radio frequency amplifier. An HP (now Agilent) 8505A system controlled by MATLAB is used to characterize a bipolar transistor in terms of its S-parameters. These measurements are used to design input and output matching networks for a prescribed 20 dB gain. The resulting design is verified in both MATLAB and a third party RF design package. A Simulink model of the transistor with the LC matching circuits is created to show how S-parameter models can be incorporated in the Simulink environment.
- Publisher: Dick Benson
- Date: 17-01-2013
- Size: 369 KB
- Platform: Matlab, Scripts
- Generate Simple QPSK modulator using Simulink
- License: Freeware

In this project work I try to design a QPSK modulator with SIMULINK/ Matlab. Generate PN-code as data and mapping for I & Q fitted to Embedded (M. file) Odd/ Even, for processing and sum them to produce QPSK signal.
- Publisher: Giahd Elamary
- Date: 08-02-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Simulink programmable pulse generator
- License: Freeware

The pulse generator included in Simulink does not provide the ability to programmatically set the parameters. This block provides inputs that allow the amplitude, pulse width, and pulse period to be set. It's fairly simple, but wasn't obvious to me so I thought I'd share it..
- Publisher: Dustin
- Date: 20-01-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Simulink LED
- License: Freeware

Simulink LED Used to display status of signal. 'Outport' Checkbox is for displaying the current value, the user can connect the outport with a display block, the value from the outport of LED is equal to the inport. The range syntax: (-inf 1] (0.5 0.7) [0 1] (2 inf) please make sure that the '-inf' and 'inf' are always with brackets '(' and ')'. Hint: Using with only one Range (should be Range1), please leave Range2 being empty..
- Publisher: Po Hu
- Date: 17-01-2013
- Size: 20 KB
- Platform: Matlab, Scripts
- New Block library Simulink called Detection Frequency Value
- License: Freeware

It is a new block library simulink called Detection of Frequency of periodic signal..
- Publisher: Dit Papa Lamine ndao
- Date: 24-01-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- M File Computing Rational Coefficiant For Heart VI1 Simulink
- License: Freeware

It is M File for computing the rational coefficiants for HeartVI1 Simulink..
- Publisher: Dit Papa Lamine ndao
- Date: 15-03-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Analog and Mixed-Signal Circuit Modeling with Simulink Product Family Webinar Files
- License: Freeware

This ZIP-file contains the demonstration files used during the "Analog and Mixed-Signal Circuit Modeling with Simulink Product Family" webinar presented on June 22, 2004..
- Publisher: B. E.
- Date: 19-06-2013
- Size: 143 KB
- Platform: Matlab, Scripts
- HeartVI1-31 block simulink investigation
- License: Freeware

it is gon investigation heart VI1 block simulink in stimulation 3 chambers S,A,and V-6 figures scopes.
- Publisher: Dit Papa Lamine ndao
- Date: 10-03-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Heart VI1 Simulator Simulink Investigation 22-Monitoring
- License: Freeware

It is Heart Vi1 Simulator Simulink in Investigation 22 and Monitoring..
- Publisher: Dit Papa Lamine ndao
- Date: 04-03-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- A New Block Simulink Of Chao Emetter and Receptor called CHAOVI1ETRT
- License: Freeware

It is a new block simulink of a CHAO emetter and receptor called the CHAOVI1ETRT.The program will be well outliner in other versions by controlling the linear part and the non linear part of my chao systemVI1..
- Publisher: Dit Papa Lamine ndao
- Date: 23-05-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Simulink for Teaching Signal Processing Courses
- License: Freeware

The zip files contains Simulink™ models that can be used for Teaching Signal Processing Concepts interactively. The models can be used for demonstrations or with modern teaching methods. The examples build on the ideas presented in the paper "Interactive models for teaching digital signal processing", Proc. IEEE DSP Workshop 2009. The paper can be downloaded from the IEEE website over here: http://ieeexplore.ieee.org/xpl/freeabs_all...rnumber=4785928.
- Publisher: Kirtan Mod
- Date: 19-06-2013
- Size: 6226 KB
- Platform: Matlab, Scripts
- Introduction to Simulink for Signal Processing
- License: Freeware

These are MATLAB™ and Simulink™ demos that goes with the "Introduction to Simulink for Signal Processing "seminar. Download, and unzip the zip file, and CD into that folder. Instructions: Run ANC_menu.m file from your MATLAB command prompt to open the HTML menu from which one can access all the demos in the right order..
- Publisher: Arvind Ananthan
- Date: 16-04-2013
- Size: 41 KB
- Platform: Matlab, Scripts
- 802.11b PHY Simulink Model
- License: Freeware

Simulink model of 802.11b wireless LAN physical layer (baseband), supporting 1Mbps, 2Mbps, 5.5Mbps, and 11Mbps modes. Model includes framing, long and short preamble, DBPSK and DQPSK modulation, Barker code spreading, Complementary Code Keying (CCK), root raised-cosine pulse shaping, channel number selection (frequency shift) and an AWGN channel. NOTE: A version of this model which works with the current release of MATLAB and Simulink is shipped with the Communications Blockset. The model makes extensive use of configurable subsystems, swapping in and out required components for chosen parameters.
- Publisher: Stuart McGarrity
- Date: 11-01-2013
- Size: 72 KB
- Platform: Matlab, Scripts
- ASK, OOK, FSK, QPSK. Digital Modulations and demodulations in SIMULINK
- License: Freeware

Digital Modulations and demodulations in SIMULINK: ASK, OOK, FSK, QPSK. Acknowledgements The author wishes to acknowledge the following in the creation of this submission:.
- Publisher: Diego Orlando Barragan Guerrero
- Date: 17-03-2013
- Size: 72 KB
- Platform: Matlab, Scripts
- Problems Of Compiling ProcessorHeart VI1 somulator simulink
- License: Freeware

You have once running well Heart VI1 simulator simulink,and with pentium 4 celeron they take 1mn50: 1)method 1 click run processor VI1 then the Start computong runs infinitely with no signal error compilation,and the phase of starting ckock computing dont start.For ART Compilation it meaning that the sequence of initialisation run infinitely ,or also pile cache memory is insufficient 2)Method 2;Accelerator processor before Run ,and procedure setting C Mex is successful It is time animation of Simulink Compilationntime simulink VHDL and IEEE 1257 compilation?.
- Publisher: Dit Papa Lamine ndao
- Date: 06-06-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- HEART VI1 simulator simulink investigation NdlT-17
- License: Freeware

It is Heart VI1 simulator simulink investigation NdlT-17 with monitoring-Free Comments monitoring-Download and click run..
- Publisher: Dit Papa Lamine ndao
- Date: 11-05-2013
- Size: 10 KB
- Platform: Matlab, Scripts
This example using Matlab commands to access Simulink Signal properties to easily create a batch file that can log almost any Simulink signals. This is very useful for batch testing when the parameters in the Simulink model are set in a m-file. It helps to reduce the use of Save-To-Workspace blocks..
- Publisher: Jarvis Davis
- Date: 21-02-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Introduction to Simulink Design Optimization
- License: Freeware

Demo files for MathWorks webinar "Introduction to Simulink Design Optimization" which occured on 3/26/2009. The recording is available here: http://www.mathworks.com/company/events/we...59&p2=493937477.
- Publisher: Arkadiy Turevskiy
- Date: 01-05-2013
- Size: 358 KB
- Platform: Matlab, Scripts
- simulink realization of Morris-Lecar neuron model
- License: Freeware

This is a simulink realization of Morris-Lecar neuron model. Run the ML_parameter.m first to load the parameters to the Workspace,and then run the ML.mdl to simulate the ML neuron model. The parameters and ode algorithm,step length,can be changed to your own interest. See"www.scholarpedia.org/article/ Morris-Lecar_model" for more detail.
- Publisher: Guan Wenye
- Date: 16-01-2013
- Size: 10 KB
- Platform: Matlab, Scripts
- Training Ramp Periodic signal to Sinusoidal Relaxation oscillator VI1 with Simulink
- License: Freeware

It is a Training for students with a ramp periodic input signal to sinusoidal relaxation oscillator VI1 with a new block library simulink..
- Publisher: Dit Papa Lamine ndao
- Date: 05-04-2013
- Size: 10 KB
- Platform: Matlab, Scripts
Simulink: Freeware | All





