Software Downloads for "Worm Gear Calculation"

Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of gearing dimensions. - Automatic transmission design with minimum input requirements. - Design for safety coefficients entered. - Calculation of a table of proper solutions. - Calculation of complete geometrical parameters. - Calculation of strength parameters, safety check. - Gearing design for precise centre-line distance.

  • Platform: WinOther
  • Publisher: MITCalc
  • Date: 27-07-2012
  • Size: 1935 KB

John Rothen wanted software for computing turns and holes on a dividing head with a non-standard worm gear ratio. I wrote a program that can be customized via a data file for ANY dividing head configuration. Also includes a program to determine which hole plates you'll need to generate all the divisions up to some input number..

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).

  • Platform: Tablets, Windows
  • Publisher: MITCalc
  • Date: 15-09-2008
  • Size: 1941 KB

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:- Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 05-06-2009
  • Size: 2150 KB

Geometric design and strength check of bevel gear with with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:- Calculation of straight, helical and curved toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 07-08-2009
  • Size: 1843 KB

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (internal). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 21-05-2011
  • Size: 2617 KB

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, worm gear, planetary gear, gear rack, belt and chain gear, bearings, beam, pins, buckling, shafts, springs, bolt connection, shaft connection, welding, tolerance analysis, tolerances, plates, shells, aerodynamics, technical formulas and many others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 11-07-2017
  • Size: 50168 KB

Geometric design and strength check of planetary gearing with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 11-07-2017
  • Size: 3972 KB

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 11-07-2017
  • Size: 4834 KB

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 11-07-2017
  • Size: 4903 KB

SimpleMinMax is a completely self-contained Visual Basic component that can save programmers hundreds of lines of VB code. It's primary purpose is to set the minimum and maximum width and height to which forms within the program can be sized, by the enduser. Created with Microsoft Visual Basic 6 SP1, SimpleMinMax is Light ActiveX l, which means it uses very little system resources. Before you can use a SimpleMinMax control in your application, you must add the CR_SMM32.OCX file to your project. If you use the control in most of your VB projects, you may want to add it to VB's Autoload file.

  • Platform: Windows
  • Publisher: crazyrides.com
  • Date: 25-6-2009
  • Size: 265 KB

MITCalc - Internal Spur Gears is an Excel spreadsheet built for geometric design and check of spur gearing with straight and helical toothing.

The calculations use procedures, algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature.

.

  • Platform: WinOther
  • Publisher: MITCalc
  • Date:

This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The
programme provides solutions to the following tasks:
- Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling
bearings SKF in all basic types and design.
- Calculation of basic bearing parameters (life, static safety, etc.).
- Calculation of adjusted bearing life acc. to the new methodology of ISO 281.
- Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.

  • Platform: Tablets, Windows
  • Publisher: MITCalc
  • Date: 22-04-2011
  • Size: 2410 KB

This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 06-03-2011
  • Size: 2313 KB

The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes:
- Selection of six basic types of buckling.
- Calculation of area characteristics of 20 types of cross-sections.
- Design of optimum profile accommodating the set load.
- Strength check of the strut.
- Calculation and graphical representation of permitted stress dependent on slenderness rate.
- A table of materials and a table of area characteristics of W, S, C and L profiles according to ANSI/AISC and I, U, L and T profiles according to DIN/ISO.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 16-06-2011
  • Size: 1372 KB

The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Selection of the type of belt with a suitable output power. - Selection of an optimum transmission alternative in view of power, geometry and weight. - Option of designing a non-standard transmission. - Calculation of all necessary strength and geometrical parameters.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 20-08-2009
  • Size: 1433 KB

The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Calculation for 2 or 3 pulleys.- Automatic design of a transmission with the minimum of input requirements.- Design and calculation of geometrical parameters (diameters of pulleys, axis distances, length of the belt, weight of the transmission)- Calculation of strength parameters (power transferred by the belt, number of belts, efficiency, etc.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 18-07-2009
  • Size: 1536 KB

The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of the type of beam and its loading with visual check. - Calculation of area characteristics of 20 types of cross sections.- Calculation of reactions in supports. - Calculation of minimum / maximum bending moment, stress and deflection of the beam.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 21-10-2009
  • Size: 1433 KB

The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Simple definition of installed shafts, including hollow ones. - Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration. - Simple definition of spatial shaft load. - Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 28-10-2009
  • Size: 1536 KB

The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Calculation of the necessary length of the belt (chain) using known positions and diameters of sprocket wheels - Achieving the desired (table) length of the belt / chain using a change in the position of the selected sprocket wheel. - Calculation of geometry (angles of wrapping, numbers of teeth in engagement, axis distances, etc.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 28-07-2009
  • Size: 1331 KB
New Reviews


Print Inspector

Whether you are using a printer connected to your local desktop computer or a print server sometimes you need to see whats going on in your printer by having a close look at the print jobs sent by the users. Print Inspector is such type software ...


Disk Genius

Disk Genius was formerly known as Partition Guru which is an all-in-one solution for disk partition management, data recovery and disk repairing. It can recover lost files from partition, backup and restore partition table, clone partition or clone ...


Safe In Cloud

It is quite difficult to find any computer users nowadays who do not need to use the web, for any purpose. Whether it is for education or entertainment, the web is your best resource. You also need to use various online services for banking, ...


PictBear

Nowadays, a majority of PC users resort to digital image editing once in a while. It may be required for retouching image captured in smart phones or for creating an album in Facebook. For some people, tinkering with digital images is a pastime too. ...


Panda Cloud Cleaner

PC security has become a tricky and complicated subject both for home users and network supervisors, with complexity and risk factors multiplying over the years. Using a single antivirus app may not be enough anymore. That explains why many users ...


SnapCrab

Nearly every PC users need to take screenshots from time to time, whether it is for personal or professional needs. While using the basic Windows screenshot capture method is available, it is not adequate for everyone. When you want to capture ...


BitKiller

Dealing with various types of data efficiently holds the key to success in any computing task. Apart from generating new data and modifying existing files, it becomes necessary to delete existing files at times. While most users resort to using ...


SeaMonkey, Portable Edition

Using the Internet has become a necessity for a majority of people, including those who do not use a PC regularly. To browse web, stream video or download online content, people often resort to using various third party apps. For example, using ...


TuckAway Intelligent Email Organizer Pro

Using an email software allow you to do a number of things including managing your address lists, emails and even ending memos, documents and even virtual letters. You can also use it to manage your tasks easily. The email software comes in ...


WebAcappella

Web design sector has witnessed several trends and technological innovations affect website development in big ways. With time, designing websites has become easier. Nowadays, you can find web design software that nearly eliminates the need to ...


New Downloads

AlphaPlugins EngraverAI Mac

Making quality engravings can
be a costly and time-consuming
project. This doesnt include
the time and money required to
...

Able RAWer

Able RAWer is a utility to
read and manipulate raw images
from digital cameras. Program
allows to resolve all the ...

Altova SchemaAgent

Altova SchemaAgent is a
graphical tool for analyzing
and managing XML Schema, XML
instance, XSLT, and WSDL file
...

PDF-XChange Editor

Comprehensive PDF Viewing File
manipulation, OCR, Security,
Multimedia comments,
Spellchecker, XFA, Import
Directly from ...

FFT Properties

Time series and frequency
spectrum analyzer optimized
for handling of long signals
(Big Data). Designed for
scientists, ...

Q2ID

Q2ID is an InDesign plugin to
quickly convert QuarkXPress
documents in Adobe InDesign.
No more re-creating documents
from ...

Frequency Generator

Oscilloscope srcoller and
accelerator Efects like Peak
and Splitt Oscilloscope kinds
like Con. Lines, Dots, Mir
Lines, ...

Graphic Equalizer Studio

you can run any windows sound
application or DVD Player
software above the Equalizer.
The Equalizer will correct the
...

KeyBlaze Typing Tutor Free

KeyBlaze is the easiest typing
tutor software available today
for anyone to quickly learn
speed typing, 10-key and touch
...

VideoSolo EditFUN

VideoSolo EditFUN is a
timeline-based video editing
software designed for both
beginners and experienced
users. With ...