Software Downloads for "Mitcalc Worm Gear Calculation"

This calculation can be used for the selection, calculation and check of rolling bearings of the company FAG, INA. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.

  • Platform: WinOther
  • Publisher: MITCalc
  • Date: 17-11-2012
  • Size: 2437 KB

MITCalc - Internal Spur Gears is an Excel spreadsheet built for geometric design and check of spur gearing with straight and helical toothing.

The calculations use procedures, algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature.

.

  • Platform: WinOther
  • Publisher: MITCalc
  • Date:

SimpleMinMax is a completely self-contained Visual Basic component that can save programmers hundreds of lines of VB code. It's primary purpose is to set the minimum and maximum width and height to which forms within the program can be sized, by the enduser. Created with Microsoft Visual Basic 6 SP1, SimpleMinMax is Light ActiveX l, which means it uses very little system resources. Before you can use a SimpleMinMax control in your application, you must add the CR_SMM32.OCX file to your project. If you use the control in most of your VB projects, you may want to add it to VB's Autoload file.

  • Platform: Windows
  • Publisher: crazyrides.com
  • Date: 25-6-2009
  • Size: 265 KB

The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes:
- Selection of six basic types of buckling.
- Calculation of area characteristics of 20 types of cross-sections.
- Design of optimum profile accommodating the set load.
- Strength check of the strut.
- Calculation and graphical representation of permitted stress dependent on slenderness rate.
- A table of materials and a table of area characteristics of W, S, C and L profiles according to ANSI/AISC and I, U, L and T profiles according to DIN/ISO.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 16-06-2011
  • Size: 1372 KB

MITCalc - Bevel Gearing helps with geometric design and strength check of bevel gear with with straight, helical and curved toothing.

Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:

· Calculation of straight, helical and curved toothing.
· Automatic design of a transmission with the minimum number of input requirements.
· Design for entered coefficients of safety (static, dynamic).

  • Platform: WinOther
  • Publisher: MITCalc
  • Date:

The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of the type of beam and its loading with visual check. - Calculation of area characteristics of 20 types of cross sections.- Calculation of reactions in supports. - Calculation of minimum / maximum bending moment, stress and deflection of the beam.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 21-10-2009
  • Size: 1433 KB

The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Simple definition of installed shafts, including hollow ones. - Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration. - Simple definition of spatial shaft load. - Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 28-10-2009
  • Size: 1536 KB

The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of solids created by extrusion or rotation of the profile. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks:- Creation of a profile in a simple graphic editor. - Calculation of area characteristics (Ix, Sx) for main axes passing through the centre of gravity. - Calculation of area characteristics (Ix, Sx) for randomly turned axes passing through the centre of gravity, including a graph.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 24-10-2009
  • Size: 1331 KB

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 16-10-2011
  • Size: 28785 KB

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 19-07-2011
  • Size: 25883 KB

This calculation includes tables and calculations for easy option of fits of machine parts and determination of their dimensional tolerances and deviations. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Selection of suitable fits of machine parts according to the international standard ISO 286. - Determination of dimensional tolerances and deviations of machine parts according to the international standard ISO 286.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 23-6-2009
  • Size: 1331 KB

The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Automatic design of a spring.- Selection of an optimal alternative of spring design in view of strength, geometry and weight.- Static and dynamic strength check.- Support for Cold formed springs and Hot formed springs- Calculation of working forces of a spring of known production and installation dimensions.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 15-07-2009
  • Size: 1638 KB

The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Automatic design of the spring.- Selection of an optimal alternative of the spring design in view of strength, geometry and weight.- Strength check of the spring.- Support for Cold formed springs and Hot formed springs- Calculation of working forces of a spring of known production and mounting dimensions.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 23-10-2009
  • Size: 1740 KB

The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:- Automatic design of the spring.- Selection of the optimal design of the spring with respect to strength, geometry and weight.- Static and dynamic strength tests.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 07-06-2009
  • Size: 1740 KB

Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains1) Tolerance analysis of linear dimensional chains. The program is designed for tolerance analysis of linear (1D) dimensional chains. The program solves the following problems: - Tolerance analysis, synthesis and optimization of a dimensional chain using the arithmetic "WC" (Worst case) method, possibly the statistical "RSS" (Root Sum Squares) method. - Analysis of a dimensional chain deformed as a result of temperature change.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 24-6-2009
  • Size: 2662 KB

The calculation is designed for a geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Automatic design of a connection bolt of standard design.- Calculation and check of connections fitted with special shanks.- Design and calculation of necessary mounting prestressing of the connection and fastening torque.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 28-10-2009
  • Size: 1536 KB

The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following tasks: - Design of force fits, possibly shrink fits. - Design of clamping connections with separated, or one-side cut hub. - Strength check of designed couplings. - Check of interference fit strained by additional radial force with bending moment. - Check of interference fit working at specific service temperature.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 05-08-2009
  • Size: 1536 KB

The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins. The program is used to solve the following tasks: design of pin for spring attachment, design of couplings with securing pins, design of cross pin in rod and sleeve, design of radial pin for shaft-hub connection, design of longitudinal pin for shaft-hub connection, design of clevis pin for rotating rod-clevis connection, strength check of designed couplings. The program includes dimensional tables for pins and clevis pins according to ANSI, ISO, DIN, BS, JIS and CSN.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 04-05-2011
  • Size: 1433 KB

The calculation is to be used for geometrical and strength design of metal springs of various types and designs, subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: 1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and designs: - Helical cylindrical compression springs of round wires and bars - Helical cylindrical compression springs of rectangular wires and bars - Helical conical compression springs of round wires and bars - Helical conical compression springs of rectangular wires and bars - Belleville springs - Helical cylindrical tension springs of round wires and bars - Helical cylindrical tension springs of rectangular wires and bars - Spiral springs - Helical...

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 27-10-2011
  • Size: 1956 KB

Geometric designs and strength checks of shaped connections of shafts with hubs. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Design of a connection with parallel side keys.
- Design of a connection with Woodruff's keys.
- Design of a connection with straight-sided splines.
- Design of a connection with involute splines.
- Strength check of designed couplings.
- The application includes a table of keys and splines according to ISO, SAE, DIN, BS, JIS and CSN.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 05-05-2011
  • Size: 1605 KB
New Reviews


Print Inspector

Whether you are using a printer connected to your local desktop computer or a print server sometimes you need to see whats going on in your printer by having a close look at the print jobs sent by the users. Print Inspector is such type software ...


Disk Genius

Disk Genius was formerly known as Partition Guru which is an all-in-one solution for disk partition management, data recovery and disk repairing. It can recover lost files from partition, backup and restore partition table, clone partition or clone ...


Safe In Cloud

It is quite difficult to find any computer users nowadays who do not need to use the web, for any purpose. Whether it is for education or entertainment, the web is your best resource. You also need to use various online services for banking, ...


PictBear

Nowadays, a majority of PC users resort to digital image editing once in a while. It may be required for retouching image captured in smart phones or for creating an album in Facebook. For some people, tinkering with digital images is a pastime too. ...


Panda Cloud Cleaner

PC security has become a tricky and complicated subject both for home users and network supervisors, with complexity and risk factors multiplying over the years. Using a single antivirus app may not be enough anymore. That explains why many users ...


SnapCrab

Nearly every PC users need to take screenshots from time to time, whether it is for personal or professional needs. While using the basic Windows screenshot capture method is available, it is not adequate for everyone. When you want to capture ...


BitKiller

Dealing with various types of data efficiently holds the key to success in any computing task. Apart from generating new data and modifying existing files, it becomes necessary to delete existing files at times. While most users resort to using ...


SeaMonkey, Portable Edition

Using the Internet has become a necessity for a majority of people, including those who do not use a PC regularly. To browse web, stream video or download online content, people often resort to using various third party apps. For example, using ...


TuckAway Intelligent Email Organizer Pro

Using an email software allow you to do a number of things including managing your address lists, emails and even ending memos, documents and even virtual letters. You can also use it to manage your tasks easily. The email software comes in ...


WebAcappella

Web design sector has witnessed several trends and technological innovations affect website development in big ways. With time, designing websites has become easier. Nowadays, you can find web design software that nearly eliminates the need to ...


New Downloads

Asoftis PC Cleaner

Forget about onerous browsing
of folders and looking for
files to be deleted. Free up
your drive space and speed up
your ...

Excel Add-in for Salesforce

Devart Excel Add-in for
Salesforce allows to use
powerful Excel capabilities
for processing and analysis of
data from ...

A VIP Team To Do List

VIP Team To Do List is a
professional time and task
management software for small
and midsize business. It
enables team ...

TextPipe Lite

TextPipe is the ultimate
Webmaster tool for updating
text. It handles an unlimited
number of files and folders,
and is ...

Altova MissionKit
Enterprise Edition

Altova MissionKit Enterprise
Edition is an award-winning
software development suite of
industrial-strength XML, SQL,
and ...

POSTER

POSTER is the 5-star rated
program for creating large
posters, signs, and banners,
and printing them up to 100 x
100 feet ...

iMindQ

iMindQ is a software that
enables users to clarify and
stimulate visual thinking, by
creating intuitive mind maps.
It ...

Altova FlowForce Server

Altova FlowForce Server is a
highly scalable server
solution to automate
enterprise workflows, data
transformations, ...

Testimonials Module for
Directy CMF

Testimonials module is one
more useful utility for your
Directy CMF

HelpNDoc

Full-featured help authoring
tool, easy and powerful,
producing HTML help files,
CHM, PDF, Word, iPhone, ePub,
Kindle and ...