Software Downloads for "Mitcalc Worm Gear Calculation"
- MITCalc - Worm Gear Calculation
- License: Shareware

Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of gearing dimensions. - Automatic transmission design with minimum input requirements. - Design for safety coefficients entered. - Calculation of a table of proper solutions. - Calculation of complete geometrical parameters. - Calculation of strength parameters, safety check. - Gearing design for precise centre-line distance.
- Platform: WinOther
- Publisher: MITCalc
- Date: 27-07-2012
- Size: 1935 KB
- MITCalc - Rolling Bearings Calculation SKF
- License: Shareware

MITCalc - Rolling Bearings Calculation can be used for the selection, calculation and check of rolling bearings of the company SKF. MITCalc - Rolling Bearings Calculation provides solutions to the following tasks:
· Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design.
· Calculation of basic bearing parameters (life, static safety, etc.).
· Calculation of adjusted bearing life acc.
- Platform: WinOther
- Publisher: MITCalc
- Date:
- MITCalc - Planet Gear Calculation
- License: Shareware

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).
- Platform: Tablets, Windows
- Publisher: MITCalc
- Date: 15-09-2008
- Size: 1941 KB
- MITCalc - Spur Gear Calculation
- License: Shareware

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:- Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.
- Platform: Windows
- Publisher: MITCalc
- Date: 05-06-2009
- Size: 2150 KB
- MITCalc - Bevel Gear Calculation
- License: Shareware

Geometric design and strength check of bevel gear with with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:- Calculation of straight, helical and curved toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).
- Platform: Windows
- Publisher: MITCalc
- Date: 07-08-2009
- Size: 1843 KB
- MITCalc Planet Gear Calculation
- License: Shareware

Geometric design and strength check of planetary gearing with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).
- Platform: Windows
- Publisher: MITCalc
- Date: 11-07-2017
- Size: 3972 KB
- MITCalc Spur Gear Calculation
- License: Shareware

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength.
- Platform: Windows
- Publisher: MITCalc
- Date: 11-07-2017
- Size: 4834 KB
- DIVHEAD
- License: Freeware

John Rothen wanted software for computing turns and holes on a dividing head with a non-standard worm gear ratio. I wrote a program that can be customized via a data file for ANY dividing head configuration. Also includes a program to determine which hole plates you'll need to generate all the divisions up to some input number..
- Platform: WinOther
- Publisher: myvirtualnetwork.com
- Date:
- Size: 92 KB
- MITCalc - Internal Spur Gear Calculation
- License: Shareware

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (internal). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).
- Platform: Windows
- Publisher: MITCalc
- Date: 21-05-2011
- Size: 2617 KB
- MITCalc
- License: Shareware

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, worm gear, planetary gear, gear rack, belt and chain gear, bearings, beam, pins, buckling, shafts, springs, bolt connection, shaft connection, welding, tolerance analysis, tolerances, plates, shells, aerodynamics, technical formulas and many others.
- Platform: Windows
- Publisher: MITCalc
- Date: 11-07-2017
- Size: 50168 KB
- MITCalc - Rolling Bearings Calculation I
- License: Shareware

This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The
programme provides solutions to the following tasks:
- Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling
bearings SKF in all basic types and design.
- Calculation of basic bearing parameters (life, static safety, etc.).
- Calculation of adjusted bearing life acc. to the new methodology of ISO 281.
- Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.
- Platform: Tablets, Windows
- Publisher: MITCalc
- Date: 22-04-2011
- Size: 2410 KB
- MITCalc - Rolling Bearings Calculation II
- License: Shareware

This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc.
- Platform: Windows
- Publisher: MITCalc
- Date: 06-03-2011
- Size: 2313 KB
- MITCalc Internal Spur Gear Calculation
- License: Shareware

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing).
- Platform: Windows
- Publisher: MITCalc
- Date: 11-07-2017
- Size: 4903 KB
- MITCalc - Timing Belts Calculation
- License: Shareware

The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Selection of the type of belt with a suitable output power. - Selection of an optimum transmission alternative in view of power, geometry and weight. - Option of designing a non-standard transmission. - Calculation of all necessary strength and geometrical parameters.
- Platform: Windows
- Publisher: MITCalc
- Date: 20-08-2009
- Size: 1433 KB
- MITCalc - V-Belts Calculation
- License: Shareware

The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Calculation for 2 or 3 pulleys.- Automatic design of a transmission with the minimum of input requirements.- Design and calculation of geometrical parameters (diameters of pulleys, axis distances, length of the belt, weight of the transmission)- Calculation of strength parameters (power transferred by the belt, number of belts, efficiency, etc.
- Platform: Windows
- Publisher: MITCalc
- Date: 18-07-2009
- Size: 1536 KB
- MITCalc - Multi pulley calculation
- License: Shareware

The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Calculation of the necessary length of the belt (chain) using known positions and diameters of sprocket wheels - Achieving the desired (table) length of the belt / chain using a change in the position of the selected sprocket wheel. - Calculation of geometry (angles of wrapping, numbers of teeth in engagement, axis distances, etc.
- Platform: Windows
- Publisher: MITCalc
- Date: 28-07-2009
- Size: 1331 KB
- MITCalc - Roller Chains Calculation
- License: Shareware

The calculation is designed for a geometrical design and strength check of common chain transmissions using roller chains. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks:
- Selection of a power suitable type of chain.
- Selection of an optimum transmission alternative regarding power, geometry and weight.
- Calculation of geometric, strength, safety and operational parameters.
- Calculation of power parameters and axis loads.
- Platform: Windows
- Publisher: MITCalc
- Date: 27-01-2011
- Size: 1397 KB
- MITCalc - Rolling Bearings Calculation
- License: Shareware

This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.
- Platform: Windows
- Publisher: MITCalc
- Date: 11-04-2005
- Size: 2196 KB
- MITCalc -Rolling Bearings Calculation II
- License: Shareware

This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc.
- Platform: Windows
- Publisher: MITCalc
- Date: 01-07-2005
- Size: 2365 KB
- MITCalc - Rolling Bearings Calculation III (FAG)
- License: Shareware

This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from FAG,INA - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.
- Platform: Windows
- Publisher: MITCalc
- Date: 04-12-2006
- Size: 2028 KB













