Software Downloads for "Load Beam Calculation"

The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of the type of beam and its loading with visual check. - Calculation of area characteristics of 20 types of cross sections.- Calculation of reactions in supports. - Calculation of minimum / maximum bending moment, stress and deflection of the beam.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 21-10-2009
  • Size: 1433 KB

Thank to this application you will know your clothes size easily ! And a also you will convert the size values of a lot of countries! also, you can save and load the calculation results for 4 people !.

  • Platform: Windows
  • Publisher: ceriboo
  • Date:
  • Size: 1024 KB

This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The
programme provides solutions to the following tasks:
- Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling
bearings SKF in all basic types and design.
- Calculation of basic bearing parameters (life, static safety, etc.).
- Calculation of adjusted bearing life acc. to the new methodology of ISO 281.
- Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.

  • Platform: Tablets, Windows
  • Publisher: MITCalc
  • Date: 22-04-2011
  • Size: 2410 KB

Loadcalc 2014 performs panel schedules and service and feeder load calculations for commercial occupancies and single family dwellings. It also prints panelboard directories in two sizes (4x6 inch and 6x8 inch) for inside the panelboard doors or covers. The 2014 National Electrical Code is fully supported. Panel Schedules: Single or three phase. Commercial or residential. Load calculations and demand factoring according to occupancy type. Service/feeder load calculations for single dwelling units Standard Calculation Method (NEC Article 220), Optional Calculation Method (NEC Article 220-30), and Additional Loads in Existing Dwelling Units Calculation Method (NEC Article 220-31).

The calculation is intended for the geometrical design and strength control of statically loaded welded connections of machine structures manufactured from carbon steels. The program enables you to design over 50 of the most common types of welded connections stressed by various combinations of load. The calculation deals with the following tasks: - Design of connections with butt welds. - Design of connections with fillet welds. - Design of connections with plug and slot welds. - Design of connections with spot (resistance) welds.

  • Platform: WinOther
  • Publisher: MITCalc
  • Date: 05-07-2012
  • Size: 4035 KB

Loadcalc 2008 performs panel schedules and service and feeder load calculations for commercial occupancies and single family dwellings. It also prints panelboard directories in two sizes (4x6 inch and 6x8 inch) for inside the panelboard doors or covers. The 2008 National Electrical Code is fully supported. Panel Schedules: Single or three phase. Commercial or residential. Load calculations and demand factoring according to occupancy type. Service/feeder load calculations for single dwelling units Standard Calculation Method (NEC Article 220), Optional Calculation Method (NEC Article 220-30), and Additional Loads in Existing Dwelling Units Calculation Method (NEC Article 220-31).

  • Platform: Windows
  • Publisher: Robert LaCapra
  • Date: 12-02-2011
  • Size: 703 KB

THE FIRST APP FOR THE CALCULATION OF WATER HAMMER!!!

Simple and practical set of utilities for the calculation of water pipes.

Calculate the relationship between speed-flow-diameter.
Inputting two parameters, calculates the remaining. Very useful for example as a first test of the diameter calculation (setting the speed between 1-2 m / s or 3.3 to 6.5 ft / s)

Load Loss Calculation.
Based on Hazen-Williams formula incorporates the coefficients of different materials. Incorporates multiple outputs (same value) coeficient ( F Christiansen).

  • Platform: Android 2.x, Android 3.x, Android 4.4, Android 4.x
  • Publisher: Irriqulture
  • Date: 29-08-2014
  • Size: 456 KB

Span Analysis is a simple and useful Excel spreadsheet that helps you in calculating analytically bending moment and shear force.

With the help of Span Analysis you have the possibility to identify the analyses action alongside a single span and generate diagrams with the specified values.



.

  • JBeam
  • License: Shareware
  • Rating

JBeam is a Java2 application for introductory level two-dimensional static and dynamic structural analysis. It supports arbitrary hinged Euler-Bernoulli and Thimoshenko beams and truss elements.

Give JBeam a try to see how useful it can be analyzing and calculating frame and truss elements.

.

PowerNet is a smart electrical engineering design and analysis software for electrical contractors, consultants and other electrical engineering organizations. Use it for medium to large projects requiring an easy to implement and easy to use software. Electrical projects such as commercial building services, industrial plants, mining operations, as well as power generation, transmission and distribution systems. PowerNet can calculate ring main or meshed network configuration as well as radial type distribution.

This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 06-03-2011
  • Size: 2313 KB

The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes:
- Selection of six basic types of buckling.
- Calculation of area characteristics of 20 types of cross-sections.
- Design of optimum profile accommodating the set load.
- Strength check of the strut.
- Calculation and graphical representation of permitted stress dependent on slenderness rate.
- A table of materials and a table of area characteristics of W, S, C and L profiles according to ANSI/AISC and I, U, L and T profiles according to DIN/ISO.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 16-06-2011
  • Size: 1372 KB

This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 11-04-2005
  • Size: 2196 KB

This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 01-07-2005
  • Size: 2365 KB

This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from FAG,INA - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 04-12-2006
  • Size: 2028 KB

The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:- Simple definition of installed shafts, including hollow ones. - Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration. - Simple definition of spatial shaft load. - Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 28-10-2009
  • Size: 1536 KB

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 16-10-2011
  • Size: 28785 KB

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.

  • Platform: Windows
  • Publisher: MITCalc
  • Date: 19-07-2011
  • Size: 25883 KB

This calculation can be used for the selection, calculation and check of rolling bearings of the company FAG, INA. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.

  • Platform: WinOther
  • Publisher: MITCalc
  • Date: 17-11-2012
  • Size: 2437 KB

MITCalc - Rolling Bearings Calculation can be used for the selection, calculation and check of rolling bearings of the company SKF. MITCalc - Rolling Bearings Calculation provides solutions to the following tasks:

· Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design.
· Calculation of basic bearing parameters (life, static safety, etc.).
· Calculation of adjusted bearing life acc.

  • Platform: WinOther
  • Publisher: MITCalc
  • Date:
New Reviews


Print Inspector

Whether you are using a printer connected to your local desktop computer or a print server sometimes you need to see whats going on in your printer by having a close look at the print jobs sent by the users. Print Inspector is such type software ...


Disk Genius

Disk Genius was formerly known as Partition Guru which is an all-in-one solution for disk partition management, data recovery and disk repairing. It can recover lost files from partition, backup and restore partition table, clone partition or clone ...


Safe In Cloud

It is quite difficult to find any computer users nowadays who do not need to use the web, for any purpose. Whether it is for education or entertainment, the web is your best resource. You also need to use various online services for banking, ...


PictBear

Nowadays, a majority of PC users resort to digital image editing once in a while. It may be required for retouching image captured in smart phones or for creating an album in Facebook. For some people, tinkering with digital images is a pastime too. ...


Panda Cloud Cleaner

PC security has become a tricky and complicated subject both for home users and network supervisors, with complexity and risk factors multiplying over the years. Using a single antivirus app may not be enough anymore. That explains why many users ...


SnapCrab

Nearly every PC users need to take screenshots from time to time, whether it is for personal or professional needs. While using the basic Windows screenshot capture method is available, it is not adequate for everyone. When you want to capture ...


BitKiller

Dealing with various types of data efficiently holds the key to success in any computing task. Apart from generating new data and modifying existing files, it becomes necessary to delete existing files at times. While most users resort to using ...


SeaMonkey, Portable Edition

Using the Internet has become a necessity for a majority of people, including those who do not use a PC regularly. To browse web, stream video or download online content, people often resort to using various third party apps. For example, using ...


TuckAway Intelligent Email Organizer Pro

Using an email software allow you to do a number of things including managing your address lists, emails and even ending memos, documents and even virtual letters. You can also use it to manage your tasks easily. The email software comes in ...


WebAcappella

Web design sector has witnessed several trends and technological innovations affect website development in big ways. With time, designing websites has become easier. Nowadays, you can find web design software that nearly eliminates the need to ...


New Downloads

Dr.Web Security Space

Comprehensive anti-virus
security solution for your
Windows PC. Real time
protection. Installation and
operation in an ...

IObit Malware Fighter

IObit Malware Fighter 8 is a
powerful and comprehensive
anti-malware and anti-virus
program that can protect your
PC ...

Dr.Web CureIt

Dr.Web CureIt is an
indispensable tool for curing
computers running MS Windows
8/7/Vista/XP/Server
2003/2008/2012 ...

The C# PDF Library

IronPDF is a Microsoft C# / VB
.Net library making it easy
for developers to generate
PDF files from within desktop,
...

NTFS Recovery Toolkit

NTFS recovery toolkit contains
file recovery tool, partition
recovery tool, partition
manager tool and disk editor
utility.

Acronis Backup for Virtual
Host

Protect your VMs with Acronis
Backup 12 - the world\'s
fastest, easiest virtual
backup! This single solution
protects ...

Active Partition Manager

Active@ Partition Manager
helps you manage storage
devices and the logical drives
or partitions that they
contain. You ...

ABC Birthday Reminder

ABC Birthday Reminder is an
easy-to-use tool that keeps
detailed information about
birthdays and other remarkable
events. ...

Joyfax Server

Network fax software allows
you to send and receive faxes
via public phone lines or T.38
SIP trunk. Key featues: Fax to
...

Mgosoft PDF To IMAGE
Converter

Mgosoft PDF To IMAGE is a
fast, affordable way to batch
convert PDF files to image
formats such as TIFF, JPEG,
PNG, BMP, ...