Software Downloads for "Hpgl Export Gerber"

HPGL Export for Rhino is a HPGL plot file export plug-in for Rhino. This plug-in gives Rhino the ability to export geometric data from Rhino to HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output.

HPGL Export for SolidWorks is a HPGL plot file export add-in for SolidWorks. This add-in gives SolidWorks the ability to export geometric data from SolidWorks drawings to HPGL Plot (PLT) files. HPGL is the Hewlett Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output.

  • Platform: Windows
  • Publisher: SYCODE
  • Date: 10-10-2005
  • Size: 375 KB

PLT Export for SolidWorks is a HPGL Plot PLT file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export geometric data from a SolidWorks drawing document to a HPGL PLT file. PLT Export for SolidWorks reads curve data from a SolidWorks drawing document and converts it into corresponding pen movements in a HPGL Plot file. PLT Export for SolidWorks is very easy to use. Once installed, it automatically loads itself into SolidWorks and adds a new submenu called "PLTExport" to the SolidWorks menu.

  • Platform: Windows
  • Publisher: SYCODE
  • Date: 23-11-2006
  • Size: 1128 KB

PCB Designer is a cost effective, easy to use electronic printed circuit board PCB layout application. Features: Export Gerber RS274X and Excellon NC drill. Import ASCII netlist. Up to 16 layer boards supported. Rulers, Guidelines and Dimensioning lines. Five libraries - new components and libraries can be added. Automated ground planes, isolated copper removal. Tracks snap to pads for easy routing. Multiple Undo / Redo..

  • Platform: WinOther
  • Publisher: Hutson Systems
  • Date: 06-08-2003
  • Size: 2145 KB

Developer library for easy creating AutoCAD DXF, PLT/HPGL, CGM, PDF files. Demos in C#, VB.NET. AutoExport via GDI+ available. CAD Export .NET supports layers, colors, linestyles and other important properties. CAD Export .NET allows programmers to easily create DXF, PLT/HPGL, CGM and PDF files.

.

  • Platform: Windows
  • Publisher: CADSoftTools
  • Date:
  • Size: 8714 KB

CAD Export VCL is a source code provided library for adding export to CAD formats in Delphi and C++ Builder applications. AutoCAD DWG/DXF, HPGL/HPGL2/PLT, CGM, SVG, PDF, SWF export formats are supported. Along with a direct export, the library offers a quick export via a metafile that needs only a dozen of code lines to create a DXF or DWG file. The library is distinguished by high speed and reasonable prices. Various license options for including royalty free ones are available. Source code gives much freedom in implementing CAD features.

  • Platform: Windows
  • Publisher: CADSoftTools
  • Date: 18-07-2013
  • Size: 1916 KB

PlotManager GERBER is an all-in-one application that allows you to view and convert GERBER RS-274D and RS-274X plot files.

With the help of the se-rm PlotManager GERBER, you can easily batch print and convert plot files. It also comes with numerous editing options and allows you to set colors for tracks and pads.

Multiple output formats, incremental coordinates, header and watermark insertion, unlimited number of viewer tabs, as well as the folder watch option are other advantages that this application comes with.

  • Platform: Windows
  • Publisher: se-rm
  • Date:
  • Size: 2969 KB

CadSoftTools presents products line to support DXF, DWG, HPGL, PLT, SVG, CGM file formats in CAD/CAM applications. CAD Importer and Exporter SDK (Software Development Kit) are in two variants: VCL and DLL. VCL tools for Borland Delphi & Borland C++ Builder facilitate the integration of DXF, DWG, HPGL, PLT, SVG, CGM support into your own applications using Borland Delphi source code without ActiveX or DLL. CAD Importer and Exporter SDK as DLL can be used in any DLL-supported development environment.

  • Platform: Windows
  • Publisher: CADSoftTools
  • Date: 04-10-2010
  • Size: 1462 KB

PloView is viewer for viewing drawing of HPGL/Vector/image file. And, it has about the same powerful input and edit function as 2D-CAD. (1) File: Support to many file formats Input: HPGL,HP-GL/2,HP RTL,PDF,DXF,DWG,GERBER,NC-Drill,IGES,SXF,EMF, TIFF,JPEG,Bitmap,PCX,FPX,GIF,PNG,CMT Output:HPGL,HP-GL/2,HP RTL,PDF,DXF,DWG,IGES,SXF,EMF,TIFF,JPEG,Bitmap, PCX,FPX,GIF,PNG,Printer,Plotter,WMF,PS,EPS,SVG,XPS,PCL,CMT Black / white and color copy to clipboard.

GerbView is an advanced but easy to use application that enables you to view, print and markup Gerber, HPGL, Excellon and raster files. GerbView supports both RS274D and RS274X (with embedded aperture information) Gerber formats.

Gerbview can visualize your design, on the screen or in hardcopy. No more waiting for photoplots or your prototype circuit board, to see your true design.

In GerbView you work with a workspace that can contain one or more files of the supported file formats.

PLT Export for IntelliCAD is a HPGL Plot (.plt) file export plug-in for IntelliCADdlT*. This plug-in gives IntelliCAD the ability to export Geometric data to HPGL plot files.

PLT Export for IntelliCAD reads the objects in an IntelliCAD drawing and converts them into corresponding pen movements in a HPGL Plot file.

PLT Export for IntelliCAD supports the following HP plotters:

Hewlett-Packard 7475A
Hewlett-Packard 7550A
Hewlett-Packard 7580B
Hewlett-Packard 7585B
Hewlett-Packard 7586B
Hewlett-Packard Draftmaster 1 (7595A)
Hewlett-Packard Draftmaster 2 (7596A)
Hewlett-Packard Draftpro (7570A)
Hewlett-Packard Draftpro-DXL (7575A)
Hewlett-Packard Draftpro-EXL (7576A)

The 'PLTExport' menu consists of the following commands:

PLTExport - Exports...

  • Platform: Windows
  • Publisher: SYCODE
  • Date:
  • Size: 1710 KB

Features:

- Printing and conversion in batch mode
- Numerous options:
+ print or instant plot (copy to output device), color/grayscale/monochrome, scale, rotation, fit to page, center on page, personal printer settings for paper size and orientation, color depth, resolution.
- Conversion/export to 18 different file formats: e.g. PDF, PDF/A and DXF
- Define personal pen settings:
- Width, color, style and On/Off can be set for every pen
- Save print and conversion jobs
- Output record with paper consumption
- Insert header and watermark
- Metric and imperial units
- Unlimited number of viewer windows
- Compare drawings in viewer
- Print or export comparison views to document changes
- Copy drawings to clipboard
- Measuring of distances and...

  • Platform: Windows
  • Publisher: se-rm
  • Date:
  • Size: 3010 KB

CAD DLL is a multifunctional library for viewing, importing and converting different CAD files, including DWG (2.5 - 2018), DXF, DWF, HPGL/ HGL, PLT, CGM, SVG, TIFF, BMP, JPG, GIF and others. The library is especially convenient for integrating CAD into applications developed in VC++, C#, Delphi, ASP .NET, C++Builder, Visual Basic and VB.NET. CAD DLL doesnt require AutoCAD or any other third party software. The license is royalty-free and has no time limitations, i.e. you can use the license as long as you want.

  • Platform: Windows
  • Publisher: CADSoftTools
  • Date: 16-10-2018
  • Size: 66697 KB

PloComp is viewer which views in piles, or arranges and views plural drawing files. Old and new drawing comparison can be performed by recognition of different colors and change area by cloud mark. (1) Support many file formats Input: HPGL, HP-GL/2, HP RTL, PDF, DXF, DWG, GERBER, NC-Drill,IGES, SXF, EMF, TIFF, JPEG, Bitmap, PCX, FPX, GIF, PNG Output: PDF, HPGL, HP-GL/2, HP RTL, EMF, TIFF, DXF, DWG, JPEG,Bitmap, IGES, SXF, PCX, FPX, GIF, PNG, Printer, Plotter (2) High-speed display of vector drawing, and many commands about display (3) Display a maximum of 20 plural drawings in piles, or arrange and display.

PloCon is program which carries out continuation output of the drawing of HPGL/Vector/Image file at Windows printer, and there are the following functions. It does not give displaying. (1) Paper and output scale - Specify fixed form paper, and carry out automatic scaling so that paper size may be matched. - Specify fixed form paper and output with designation scale. - Select fixed form paper automatically with designation scale. It is automatic selection about fixed form paper and direction of the optimal printer matched with drawing size which applied scale to drawing area.

PloViewAuto reads a lot of HPGL/Vector/Image files continuously, and converts it into format files often used, such as PDF, TIFF, DXF, and IGES, at high speed automatically. 1. File format which PloViewAuto handles is as follows. (1) Output 1 * Input HPGL,HP-GL/2,HP RTL,PDF,DXF,DWG,GERBER,NC-Drill,IGES,SXF,EMF,TIFF,JPEG,Bitmap,PCX,FPX,GIF,PNG * Output PDF,HP-GL/2,EMF,TIFF,DXF,DWG,JPEG,Bitmap,IGES,SXF, PCX,FPX,GIF,PNG,,CMT,HPGL/Printer (2) Output 2 * Input PDF * Output WMF, EMF, PS, EPS, SVG, XPS, HPGL, PCL 2.

CADEditorX is a universal ActiveX library that allows adding CAD features in such environments as .NET, HTML / JavaScript, VC++, Delphi, C++Builder, etc. Its main features include viewing, creating, editing and printing of documents. Also, you can export and convert files, add entities and get information about them. CADEditorX supports a large number of formats including AutoCAD DWG (up to 2018), DXF, HPGL, IGS, STP, STL, PDF, SVG, CGM. The distinctive feature of CADEditorX is a unique easy-to-use XML API containing a single function and a single event.

  • Platform: Windows
  • Publisher: CADSoftTools
  • Date: 18-12-2018
  • Size: 93434 KB

Points Export for AutoCAD is a plug-in for AutoCAD. This plug-in gives AutoCAD the ability to export points to text files. Reverse Engineering, GIS and similar applications work with point data. Points Export for AutoCAD reads points in the current AutoCAD drawing and write our the coordinates of the points to a text file in XYZ format. Points Export for AutoCAD is very easy to use. Points Export for AutoCAD adds a new command to AutoCAD called "POINTSOUT". Simply type "POINTSOUT" at the AutoCAD command prompt and select the points to export and an output point file name.

Professional image viewer for industry and home using. ABViewer is a multi-purpose viewer and converter, ideal for using with Total Commander or Far manager. ABViewer supports DWG (12 - 2004 / 2005), DXF, HGL, PLT, HG, HPG, PLO, PCX, BMP, JPG, JPEG, WMF, etc. ABViewer converts all supported files to BMP, EMF, JPEG, GIF formats. It allows to drag images, zoom in, zoom out, centering, printing. Advanced printing allows to print one image to many papers as "tiles" to glue a big paper afterwards. Some of Features: - DWG DXF Arcs and Circles can be drawn as smooth curves and saved to EMF as Metafile - Arcs and Ellipses and can be zoomed after pasting to MS Word without quality loosing.

  • Platform: Windows
  • Publisher: Soft Gold Ltd
  • Date: 02-12-2004
  • Size: 1346 KB

Visual Eforms (Electronic Forms) Filler (Print, Save too) for Export related documents including: Pro Forma Invoice Commercial Invoice Packing List Certificate of Origin (Generic) NAFTA Certificate of Origin Continuation Sheet for NAFTA Certificate of Origin Shipper's Letter of Instructions Shipper's Letter of Instructions (Dock Letter) Dock Receipt 7525-V (July 2000) Shipper's Export Declaration & Continuation Sheet Ocean-Airway Bill of Lading Straight Bill of Lading Canada Customs Invoice Pre-printed forms NOT required.

New Reviews


Print Inspector

Whether you are using a printer connected to your local desktop computer or a print server sometimes you need to see whats going on in your printer by having a close look at the print jobs sent by the users. Print Inspector is such type software ...


Disk Genius

Disk Genius was formerly known as Partition Guru which is an all-in-one solution for disk partition management, data recovery and disk repairing. It can recover lost files from partition, backup and restore partition table, clone partition or clone ...


Safe In Cloud

It is quite difficult to find any computer users nowadays who do not need to use the web, for any purpose. Whether it is for education or entertainment, the web is your best resource. You also need to use various online services for banking, ...


PictBear

Nowadays, a majority of PC users resort to digital image editing once in a while. It may be required for retouching image captured in smart phones or for creating an album in Facebook. For some people, tinkering with digital images is a pastime too. ...


Panda Cloud Cleaner

PC security has become a tricky and complicated subject both for home users and network supervisors, with complexity and risk factors multiplying over the years. Using a single antivirus app may not be enough anymore. That explains why many users ...


SnapCrab

Nearly every PC users need to take screenshots from time to time, whether it is for personal or professional needs. While using the basic Windows screenshot capture method is available, it is not adequate for everyone. When you want to capture ...


BitKiller

Dealing with various types of data efficiently holds the key to success in any computing task. Apart from generating new data and modifying existing files, it becomes necessary to delete existing files at times. While most users resort to using ...


SeaMonkey, Portable Edition

Using the Internet has become a necessity for a majority of people, including those who do not use a PC regularly. To browse web, stream video or download online content, people often resort to using various third party apps. For example, using ...


TuckAway Intelligent Email Organizer Pro

Using an email software allow you to do a number of things including managing your address lists, emails and even ending memos, documents and even virtual letters. You can also use it to manage your tasks easily. The email software comes in ...


WebAcappella

Web design sector has witnessed several trends and technological innovations affect website development in big ways. With time, designing websites has become easier. Nowadays, you can find web design software that nearly eliminates the need to ...


New Downloads

Lodgit Desk Hotel Software
for Mac

Booking software for all kinds
of lodging establishments
incl. reservation schedule,
booking and guest list,
cleaning ...

Tipard DVD Creator

Tipard DVD Creator can burn
DVD disc with any videos in
MP4, AVI, MKV, MOV, WMV, TS
etc. formats. Besides, it can
help ...

The C# PDF Library

IronPDF is a Microsoft C# / VB
.Net library making it easy
for developers to generate
PDF files from within desktop,
...

Active@ UNDELETE

Losing important data due to
accidentally deleting it or
formatting a disk can leave
you in a very bothersome
situation. ...

Dr.Web Security Space

Comprehensive anti-virus
security solution for your
Windows PC. Real time
protection. Installation and
operation in an ...

Active@ Disk Image

Active@ Disk Image is a PC
disk image software that can
do a backup as well as clone
the full hard drive. A backup
image ...

NetCrunch Suite

An all-in-one and agentless
network monitoring and
management system, capable of
monitoring every device in
your network. ...

Easy Card Creator Express

The ideal choice for small to
medium sized organizations and
individuals looking for an
affordable photo ID card ...

VideoPad Masters Edition
for Mac

VideoPad Masters Edition for
Mac is a fully featured video
file editor for creating
professional quality videos in
...

NetBull

NetBull is the best and most
undetectable keylogger you can
find on the Net. By using the
latest in PC monitoring ...