Software Downloads for "Buckling Beam"
- MITCalc - Buckling Calculation
- License: Shareware

The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes:
- Selection of six basic types of buckling.
- Calculation of area characteristics of 20 types of cross-sections.
- Design of optimum profile accommodating the set load.
- Strength check of the strut.
- Calculation and graphical representation of permitted stress dependent on slenderness rate.
- A table of materials and a table of area characteristics of W, S, C and L profiles according to ANSI/AISC and I, U, L and T profiles according to DIN/ISO.
- Platform: Windows
- Publisher: MITCalc
- Date: 16-06-2011
- Size: 1372 KB
- MasterBeam: Concrete Beam Designer
- License: Freeware

Free version of MasterKey Concrete Beam Designer for the analysis and design of cantilever, simple, fixed and partialy fixed single span beams to BS 8110 and EuroCode 2. The degree of integration, simplicity of input and speed of design make MasterBeam Concrete Beam Designer the ideal tool for the infrequent user. The truly interactive nature of MasterBeam Concrete Beam Designer also makes it the ideal teaching tool. Commercial version analyses & designs up to 16 span beams and sub-frames..
- Platform: Windows
- Publisher: Civil & Structural Computer Services Ltd
- Date: 19-01-2011
- Size: 239232 KB
- MITCalc3D for Autodesk Inventor
- License: Shareware

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.
- Platform: Windows
- Publisher: MITCalc
- Date: 16-10-2011
- Size: 28785 KB
- MITCalc3D for Solid Edge
- License: Shareware

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.
- Platform: Windows
- Publisher: MITCalc
- Date: 19-07-2011
- Size: 25883 KB
- AutoFEM Buckling Analysis
- License: Shareware

AutoFEM Buckling Analysis is usefull in designing structures, operation of which involves a lasting impact on the intensity of various loads. With this module the user can obtain the safety margin for the so-called "Critical load" - load at which the design can be a significant leap inelastic deformation, often leading to its destruction or serious damage. In the parameters of the problem of stability one can determine the number of forms of equilibrium states to be determined and other parameters of the calculation.
- Platform: Windows
- Publisher: AutoFEM Software LLP
- Date: 30-04-2012
- Size: 179702 KB
- Beam Spectral Element
- License: Freeware

Calculate the dynamic stiffness using spectral element for a beam in space.
- Platform: Matlab, Scripts
- Publisher: Paulo J. Paupitz Goncalves
- Date: 22-01-2013
- Size: 10 KB
- Natural frequencies & buckling loads of columns using Finite Element Method
- License: Shareware

These files calculate the natural frequencies and Euler buckling load using Finite element technique. Hermitian beam elements are used as interpolation functions. Assembled mass, geometric stiffness matrix and stiffness matrix are calculated and solved for eigenvalues.First four mode shapes are plotted. Four different boundary conditions are considered. Depending on the user requirement Young's Modulus, number of elements, mass per unit length and boundary can be changed. Values obtained using FEM are compared with theoretical values and error percentage also shown.
- Platform: Matlab, Scripts
- Publisher: Siva Srinivas Kolukula
- Date: 15-02-2013
- Size: 10 KB
- Concise Beam
- License: Shareware

Concise Beam is a complex and yet easy to use CAD application that enables users to design and analyze precast concrete beams.
The application performs its tasks in accordance to ACI 318, CSA A23.3 and AS3600 codes. Users can model cross-sections to meet their demands as well as create prismatic variations over the length of the beam.
Using Concise Beam you can choose from multiple beam layouts such as simply supported beams, cantilevers, load distribution and cast-in-place pours.
- Platform: Windows
- Publisher: Black Mint Software
- Date:
- EngiLab Beam.2D ML
- License: Shareware

EngiLab Beam.2D ML is a practical, lightweight application designed to help you run a linear static analysis of a 2D frame using the Finite Element Method.
Using this CAD tool you can draw and analyze 1D multi-span beam as well as 2D frames and trusses. The application appeals to both engineering students and professionals allowing them to generate deformation, axial force, shear force and bending moment diagrams.
EngiLab Beam.2D ML automatically generates detailed reports after the analysis and enables users to export the data in Microsoft Excel format.
- Platform: WinOther
- Publisher: EngiLab
- Date:
- Lunessaphir Mini Beam Simulator
- License: Freeware

Lunessaphir Mini Beam Simulator is a lightweight and easy to use application that provides you with a simulator for antenna propagation.
Based on user-defined parameters (antenna distance, RF frequency, difference of phase shift etc.), the application determines the way propagation is distributed.
.
- Platform: Windows
- Publisher: Azusa Ashley KANAI
- Date:
- Beam Rider
- License: Freeware

Beam Rider is an original truetype font that will allow you to change the ordinary looks of your documents..
- Platform: WinOther
- Publisher: fontframe.com
- Date:
- Size: 163 KB
- MITCalc
- License: Shareware

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, worm gear, planetary gear, gear rack, belt and chain gear, bearings, beam, pins, buckling, shafts, springs, bolt connection, shaft connection, welding, tolerance analysis, tolerances, plates, shells, aerodynamics, technical formulas and many others.
- Platform: Windows
- Publisher: MITCalc
- Date: 11-07-2017
- Size: 50168 KB
- MITCalc - Beam Calculation
- License: Shareware

The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of the type of beam and its loading with visual check. - Calculation of area characteristics of 20 types of cross sections.- Calculation of reactions in supports. - Calculation of minimum / maximum bending moment, stress and deflection of the beam.
- Platform: Windows
- Publisher: MITCalc
- Date: 21-10-2009
- Size: 1433 KB
- MITCalc3D for SolidWorks
- License: Shareware

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge.MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.
- Platform: Windows
- Publisher: MITCalc
- Date: 18-08-2009
- Size: 23552 KB
- MasterBeam: Steel Beam Designer
- License: Freeware

Free version of MasterKey Steel Beam Designer for the analysis and design of cantilever, simple, fixed and partialy fixed single span beams to BS 5950 and EuroCode 3. The degree of integration, simplicity of input and speed of design make MasterBeam Steel Beam Designer the ideal tool for the infrequent user. The truly interactive nature of MasterBeam Steel Beam Designer also makes it the ideal teaching tool. Full version analyses and designs up to 16 span beams and sub-frames..
- Platform: Windows
- Publisher: Civil & Structural Computer Services Ltd
- Date: 18-02-2011
- Size: 239232 KB
- GRAPE GBW32 V
- License: Shareware

GBW32 V5.0 is the update to GBW32 v4.0. GBW32 V5.0 is a 32 bit Windows 3D Finite Element program that uses standard third order beam and truss elements to model a wide range of Civil and Mechanical structures. The graphical user interface is powerful and easy to use to quickly model a structure, apply loads and constraints, and analyze the model. GBW32 V5.0 supports release nodes for all loadings, batch analysis, auto analysis, has an undo/redo feature and a built in property section calculator. Displacements, loads, stress information and animation are available to determine the effect of the applied loading and constraints.
- Platform: WinOther
- Publisher: Grape Software Inc.
- Date: 17-07-2012
- Size: 6810 KB
- Beam (BEware, Another Mailer)
- License: Freeware

Beam is an open-source mail-client for BeOS that aims to be fast, stable and feature-complete.The main idea is to produce a full-featured graphical mail-client for BeOS that provides all modern mail protocols/standards and is fun to use..
- Platform: WinOther
- Publisher: beam.sourceforge.net
- Date: 21-08-2012
- Size: 2011 KB
- Beam Blocks
- License: Freeware

Beam Blocks is a tile-based, turn-based, deterministic puzzle game. The object of the game is to, on each level, collect a fixed number of gems and escape the level through an exit hatch, resembling in that aspect games like Boulderdash..
- Platform: Linux, Mac, Windows
- Publisher: beamblocks.sourceforge.net
- Date: 08-05-2012
- Size: 76 KB
- Ion Beam Simulator
- License: Freeware

Library for ion optics, plasma extraction and space charge dominated ion beam transport..
- Platform: Linux, Windows
- Publisher: ibsimu.sourceforge.net
- Date: 22-10-2012
- Size: 757 KB
- Beam and Truss Analysis utilities
- License: Freeware

2 utilities for solving the basic problems in statics- the one dimensional beam and plain truss. both receive model info as input (has to be built as a MATLAB file, see examples) and produce output results such as reactions values and internal forces in members. See the README file for info..
- Platform: Matlab, Scripts
- Publisher: Roee Lahav
- Date: 17-04-2013
- Size: 61 KB







