Home > By category > Scripts > Email
Sort by : Name|Date|Downloads|Rating|

Listing of Email in Scripts

Gubby is a small UNIX tool that keeps track of where and when procmail delivers your email. Scans a procmail logfile and display a realtime-updated display of mailboxes and new email. Reads mailbox contents using a specified external mailreader (or MUA).

  • Platform: Scripts, C and C plus plus

This is a mime encoding tool. The resulting program will compile on both the crippled C compilers bundled with some commercial *nix distributions, and on full ANSI/ISO C compilers like gcc..

  • Platform: Scripts, C and C plus plus

Mailsync is a way of synchronizing a collection of mailboxes. The algorithm is a 3-way diff. Two mailboxes are simultaneously compared to a record of the state of both mailboxes at last sync. New messages and message deletions are propagated between the two mailboxes.

  • Platform: Scripts, C and C plus plus

MaSoWeb - Mail It script allows you to send tha content of a form in your inbox directly..

  • Platform: Scripts, CGI and Perl

POPFile is an automatic mail classification tool. Once properly set up and trained, it will scan all email as it arrives and classify it based on your training. You can give it a simple job, like separating out junk e-mail, or a complicated one-like filing mail into a dozen folders.

  • Publisher: amatubu
  • Date: 15-02-2013
  • Size: 1608 KB
  • Platform: Scripts, CGI and Perl

Batemail is a Perl script that you could use between your MTA (e.g. Sendmail) and your local mailer (e.g. Procmail) to remove potentially nasty attachments from email messages. Basically, it takes input on STDIN, searches for (and possibly removes) MIME attachments with a given filename extension, and pipes the output to the local mailer.

  • Platform: Scripts, C and C plus plus

This is a Perl script that you can run on your website in order to allow others to send you email through a web interface. Unlike other web to email gateways, Contact Form is designed to thwart spammers. It does not allow email to be sent to unknown addresses, nor does it reveal addresses that it knows.

  • Platform: Scripts, CGI and Perl

qmHandle is a simple program which allows you to view and manage the qmail message queue. The key features of qmHandle are: - Freeware and open source, under the GNU General Public License; - You can read the qmail queue, like you do with the qmail-qread program.

  • Platform: Scripts, CGI and Perl

Notespam is a very simple script for Linux and Unix systems that can tag messages as spam, based on any of the DNS-based Realtime Blackhole Lists (RBLs) available over the Internet. Notespam works as a filter: it takes an e-mail message on STDIN, and will produce an e-mail message on STDOUT, which has an additional header (X-RBL-Check) if any of the relay servers matched one of the listed RBL services.

  • Publisher: Jon Lasser
  • Date: 06-02-2013
  • Size: 10 KB
  • Platform: Scripts, CGI and Perl

Vorpal Mail is intended as a more user-friendly (or should that be admin-friendly) replacement for the standard sendmail package. It aims to provide all the features that are required of a modern mail server, without all the complexity caused by sendmail's rules based configuration file.

  • Platform: Scripts, C and C plus plus

It provides a simple way to make newsletter/discussion list email subscribe/unsubscribe text links function as a handy form selection box. Real world testing has shown this to be 400% more effective than standard listserv-type links! The HTML output pages (subscribe/unsubscribe confirmation) are very easy to customize as desired, so the script will blend seamlessly with your site design.

  • Publisher: AbleDesign
  • Date: 04-02-2013
  • Size: 10 KB
  • Platform: Scripts, CGI and Perl

E-mail viruses costs businesses millions of pounds every year. Spam accounts for around 60% of all e-mail traffic, wasting large quantities of network bandwidth and resources. There are many commercial e-mail systems available for a high cost that claim to help stop spam, but they are rarely effective in real-world environments.

  • Platform: Scripts, CGI and Perl

PMilter is an attempt to reimplement Sendmail's milter (mail filter) protocol in pure Perl. There are many reasons for this, including independence from Sendmail's libmilter, as well as freedom from POSIX threads (helps stability for Perl filters), etc.

  • Platform: Scripts, CGI and Perl

senddfbymail is a Perl script (with Web interface) that can download files from the Internet (via FTP or HTTP), split them into parts, and e-mail them to the user..

  • Platform: Scripts, CGI and Perl

msmtp is an SMTP client. In the default mode, it transmits a mail to an SMTP server (for example at a free mail provider) which does the delivery. To use this program with your mail user agent (MUA) you must create a configuration file with your mail account(s) and tell your MUA to call msmtp instead of /usr/sbin/sendmail.

  • Platform: Scripts, C and C plus plus

TradeClient is a UNIX mail client and personal information manager. It uses GTK and includes support for multiple accounts, both POP3 and IMAP, SMTP, and LDAP. It includes an address book that can interact fully with an LDAP server, and a personal calendaring system.

  • Publisher: Trey Tabner
  • Date: 24-01-2013
  • Size: 2232 KB
  • Platform: Scripts, C and C plus plus

KShowmail is a POP3 mail checker for the KDE. Headers and complete mails can be viewed without loading them to the local mail client. Unpleasant mail can be deleted from the server. The list of displayed mails can be refreshed via configurable timers.

  • Platform: Scripts, C and C plus plus

WeOnlyDo! COM Pop3Server ActiveX control is a component that can be easily integrated into your applications to provide full Pop3 protocol server implementation. All you need to do is to put it on VB form, call it's Start method and it's immediately accepting connections by your clients! It fully supports commands defined in RFC1939.

  • Publisher: WeOnlyDo
  • Date: 21-01-2013
  • Size: 1966 KB
  • Platform: Scripts, ASP.NET

Qmail-Scanner is an add-on that enables a Qmail email server to scan gatewayed email for certain characteristics (i.e. a content scanner). It is typically used for its anti-virus and anti-spam protection functions, in which case it is used in conjunction with external scanners.

  • Publisher: Jason Haar
  • Date: 19-01-2013
  • Size: 225 KB
  • Platform: Scripts, CGI and Perl

EasyMail.Net Verify will check the validity of any internet email addresses, giving you an easy way to clean your email address lists, and prevent bad addresses from getting on your lists in the first place. Email addresses can be verified one at a time or in bulk.

  • Platform: Scripts, ASP.NET

Echolot is a Pinger for anonymous remailers. A Pinger in the context of anonymous remailers is a program that regularily sends messages through remailers to check their reliability. It then calculates reliability statistics which are used by remailer clients to choose the chain of remailers to use.

  • Platform: Scripts, CGI and Perl

Anti SPAM Form to Email allows you to get data from your website to your email inbox with Form2Email.net. You need just 3 simple steps to get the data from your website. Make a form for your site. Next, upload Form2Email.net CGI Perl script to your website, it's free and this converts the data into an email and sends it to you.

  • Platform: Scripts, CGI and Perl

ASPired2Refer is an ASP application for allowing your users to refer your pages to a friend. This is essentially a Tell-A-Friend feature. With ASPired2Refer, you add a link on a page and once a user clicks on the link, they will be taken to a page to enter the e-mail address to send information about the page to a friend.

  • Platform: Scripts, ASP.NET

Besides sending simple mails, they will be able to send file attachments as well with their message..

  • Platform: Scripts, CGI and Perl

This application in MFC send anonymous e-mail with attachment. The winsock allows you to connect to mail server to send mail. This application also lets you learn about base64 encoding, winsock, CFile class for file handling..

  • Platform: Scripts, C and C plus plus

Postfix is an alternative to the widely-used Sendmail program.Postfix attempts to be fast, easy to administer, and secure, while at the same time being sendmail compatible. Postfix runs on AIX, BSD, HP-UX, IRIX, LINUX, MacOS X, Solaris, Tru64 UNIX, and other UNIX systems.

  • Platform: Scripts, C and C plus plus

TFmail is a script which allows you to receive the results of an HTML form submission via an email message. TFmail is *not* a plug-in replacement for FormMail.pl, although it has a lot of the same features. TFmail is configured via text files on the server rather than via hidden form fields, has templates for output, and can support HTTP file uploads.

  • Platform: Scripts, CGI and Perl

If you are looking for an easy to use and reliable IMAP4 component -- you have found the source! Advanced Webmail is an ASP.NET based full featured webmail solution designed on the IMAP4 email protocol using AdvIMAP4 component. This will enable your to send, retrieve, merge, compose, view, edit, store and print Internet email messages.

  • Publisher: ASPFusion
  • Date: 12-01-2013
  • Size: 4014 KB
  • Platform: Scripts, ASP.NET

SendmailTM implements a general purpose internetwork mail routing facility under the UNIX™ operating system. It is not tied to any one transport protocol d-deOCL its function may be likened to a crossbar switch, relaying messages from one domain into another.

  • Publisher: Eric Allman
  • Date: 09-01-2013
  • Size: 2017 KB
  • Platform: Scripts, C and C plus plus

isync is a command line application which synchronizes mailboxes; currently Maildir and IMAP4 mailboxes are supported. New messages, message deletions and flag changes can be propagated both ways. isync is suitable for use in IMAP-disconnected mode. Synchronization is based on unique message identifiers (UIDs), so no identification conflicts can occur (as opposed to some other mail synchronizers).

  • Platform: Scripts, C and C plus plus

New Downloads

DocuFreezer

DocuFreezer is the software
for batch converting different
document types. DocuFreezer
document conversion algorithms
...

Photostage Free Mac
Slideshow Software

Free software to create a
slideshow from your digital
photos on your Mac and add
video clips, music and more.
Easily drag ...

DetachPipe Free

Make Microsoft Outlook faster,
more stable and easier to
backup with DetachPipe - the
email attachment processor.
...

SSuite Office WordGraph

WordGraph is a free and very
useful alternative to
Microsoft\'s Word,
OpenOffice\'s Writer, or
anything else out there ...

UltraFileSearch Lite

File Search Utility which is
able to quickly find Files,
Folders and Text on your
Local, Network, DVD, CD-ROM,
USB Hard ...

Visual SEO Studio

A desktop SEO Audit Tool, a
Visual approach to make SEO
tasks quick and easy. Crawl,
Spot on-site issues at a
glance, ...

ECTkeyboard

ECTKeyboard is a program that
allows individuals with
reduced motor skills to type
text letter by letter. Works
with eye ...

Donar MP3 Recorder

Donar MP3 Recorder is a
flexible sound recorder tool
designed to capture any sound
in real-time that goes through
your PC ...

Portable Efficient Sticky
Notes

Throw away the traditional
paper sticky notes and start
using the completely free
Efficient Sticky Notes!
"Stick" your ...

Azureus Ultra Accelerator

Azureus Ultra Accelerator is a
program designed to boost
Azureus downloads. These
practical and professional
plug-in ...