Software Listing of Author : "Myvirtualnetwork.com"

  • 3WIRE
  • License: Freeware
  • Price: 0.00

Calculates the best wire size and measurement over wires when using the three wire method to check the pitch diameter of a thread.

  • Platform: WinOther
  • ATMOS76
  • License: Freeware
  • Price: 0.00

The NASA 1976 standard atmosphere model.

  • Platform: WinOther
  • BOILERS
  • License: Freeware
  • Price: 0.00

Gene Rutkowski has generously allowed me to add his model locomotive boiler design tool to the collection.

  • Platform: WinOther
  • BOLTCIRC
  • License: Freeware
  • Price: 0.00

It's often easier and more accurate to lay out holes on a boltcircle with x-y coordinates than to scribe and step off the circle

  • Platform: WinOther
  • BOLTLOAD
  • License: Freeware
  • Price: 0.00

Another great submission by Richard Williams in the UK.

  • Platform: WinOther
  • CHANGEJS
  • License: Freeware
  • Price: 0.00

Jaring Siemensma, of the Netherlands, has written his own version of a program to calculate the change gears needed to cut a particular thread.

  • Platform: WinOther
  • CIRC3
  • License: Freeware
  • Price: 0.00

Find the radius of the circle that passes through three (non-colinear) points.

  • Platform: WinOther
  • COLLET
  • License: Freeware
  • Price: 0.00

John Way, writing in Machinist's Workshop, devised a way to make collets for square or hex stock without using a spendy broach.

  • Platform: WinOther
  • CONROD
  • License: Freeware
  • Price: 0.00

Tom Roach in South Africa needed a program to compute connecting rod clearance relative to cylinder bottom.

  • Platform: WinOther
  • CROD
  • License: Freeware
  • Price: 0.00

Tom Roach in South Africa suggested a program to compute piston position as a function of crank radius and angle and connecting rod length.

  • Platform: WinOther
  • CSEG
  • License: Freeware
  • Price: 0.00

Performs circular segment calculations.

  • Platform: WinOther
  • CUTS
  • License: Freeware
  • Price: 0.00

Solves the problem of how to cut many pieces of various lengths from stock that comes in standard lengths (e.

  • Platform: WinOther
  • DALLOW
  • License: Freeware
  • Price: 0.00

A friend wanted to drill a 0.

  • Platform: WinOther
  • DDH
  • License: Freeware
  • Price: 0.00

A Differential Dividing Head (hence DDH) creates the possibility of large numbers of divisions by using gearing to move the hole plate at some fraction of the spindle rotation.

  • Platform: WinOther
  • DIFFTHRD
  • License: Freeware
  • Price: 0.00

Very fine threads are great for precise positioning and generating large torque advantages but one seldom has the gear to cut the threads and, once cut, they're very delicate.

  • Platform: WinOther
  • DIOPHAN
  • License: Freeware
  • Price: 0.00

Solve linear Diophantine equations

  • Platform: WinOther
  • DIVHEAD
  • License: Freeware
  • Price: 0.00

John Rothen wanted software for computing turns and holes on a dividing head with a non-standard worm gear ratio.

  • Platform: WinOther
  • DPLATE
  • License: Freeware
  • Price: 0.00

How does one make an accurate dividing plate when one doesn't have a dividing head?

  • Platform: WinOther
  • FINDTHRD
  • License: Freeware
  • Price: 0.00

Andy Pugh, UK, has compiled a table of ~400 "standard" threads arranged in order of size (from 10 Whitworth instrument (0.

  • Platform: WinOther
  • FTAPER
  • License: Freeware
  • Price: 0.00

Two spheres can be used to measure a female taper.

  • Platform: WinOther
  • GAGE
  • License: Freeware
  • Price: 0.00

Confused by gage numbers?

  • Platform: WinOther
  • GEARATIO
  • License: Freeware
  • Price: 0.00

This program automates the process of deciding which gears to use to obtain a desired ratio.

  • Platform: WinOther
  • GEARFIND
  • License: Freeware
  • Price: 0.00

Given a desired gear ratio and associated tolerance, this program will search for a gear train that produces that ratio.

  • Platform: WinOther
  • GEARING
  • License: Freeware
  • Price: 0.00

Marv Windecker sent along a clever program for calculating variables associated with a gear driven vehicle.

  • Platform: WinOther
  • GEARPA
  • License: Freeware
  • Price: 0.00

An experimental program to allow HSMs lacking sophisticated gear measurement tools to distinguish between 14.

  • Platform: WinOther
  • GEARSPUR
  • License: Freeware
  • Price: 0.00

Enter any two of number of teeth, outside diameter, pitch, or pitch diameter and this program will calculate all the other relevant data for a spur gear.

  • Platform: WinOther
  • HINTS
  • License: Freeware
  • Price: 0.00

Not a program but a completely unstructured collection of hints and mini-projects that some may find useful.

  • Platform: WinOther
  • KEYWAY
  • License: Freeware
  • Price: 0.00

Another excellent B.

  • Platform: WinOther
  • KNURL
  • License: Freeware
  • Price: 0.00

To obtain perfect knurls on the first try, the circumference of the work should be an integral multiple of the tooth spacing on the knurl wheel.

  • Platform: WinOther
  • LVERN
  • License: Freeware
  • Price: 0.00

Make that tool you built read more precisely with a vernier.

  • Platform: WinOther
  • MANDREL
  • License: Freeware
  • Price: 0.00

If you wind your own springs, you know that sizing the mandrel for winding is generally done by guesswork.

  • Platform: WinOther
  • MRADIUS
  • License: Freeware
  • Price: 0.00

An accurate technique for measuring the radius of curvature of a part.

  • Platform: WinOther
  • MTAPER
  • License: Freeware
  • Price: 0.00

Redgie Joy requested a program to implement the calculations for accurately measuring the included angle of a conical part using a precision V-block and a sine bar

  • Platform: WinOther
  • OFFKEY
  • License: Freeware
  • Price: 0.00

While the program name accurately describes my singing, this has nothing to do with music.

  • Platform: WinOther
  • OGIVE
  • License: Freeware
  • Price: 0.00

A typical rocket nose cone shape is described as an 'ogive'.

  • Platform: WinOther
  • OSBORNE
  • License: Freeware
  • Price: 0.00

Guy Lautard documents a quick and easy iterative method to accurately center round stock in the milling machine - the so-called "Osborne Maneuver".

  • Platform: WinOther
  • PIPECON
  • License: Freeware
  • Price: 0.00

Martin Connelly, in the UK, sent along his program to convert pipe shapes from 3 dimensional XYZ coordinates to YBC bend data and vice versa

  • Platform: WinOther
  • POLYCONE
  • License: Freeware
  • Price: 0.00

A polycone (my terminology) is a 3D figure with regular polygon base and facet-like triangular faces that meet at a central point to form a conical shape with flat sides.

  • Platform: WinOther
  • RFRAC
  • License: Freeware
  • Price: 0.00

This program will find the rational approximation to a decimal fraction

  • Platform: WinOther
  • ROUNDER
  • License: Freeware
  • Price: 0.00

This is a tool to assist in rounding over workpieces in the milling machine analogous to the method of BALLCUT for the lathe.

  • Platform: WinOther
  • SINEBAR
  • License: Freeware
  • Price: 0.00

Calculate stack height for a sinebar and examine error behavior thereof.

  • Platform: WinOther
  • SPACEBLK
  • License: Freeware
  • Price: 0.00

A tool for selecting blocks from a set to make a spacer of given size.

  • Platform: WinOther
  • SPRINGK
  • License: Freeware
  • Price: 0.00

Dave Baker, in the UK, has an interesting formula for computing the spring constant of a spring.

  • Platform: WinOther
  • STEAMHP
  • License: Freeware
  • Price: 0.00

Don Nichols wrote a handy program to calculate the approximate horsepower produced by a steam engine.

  • Platform: WinOther
  • UGROOVE
  • License: Freeware
  • Price: 0.00

Incremental cutting of U-shaped grooves (e.

  • Platform: WinOther
  • UNGULA
  • License: Freeware
  • Price: 0.00

Calculates the volume of ungulas

  • Platform: Win2000, WinOther
  • VERNIER
  • License: Freeware
  • Price: 0.00

Two plate angular verniers will make your dividing problems easier and save you a lot of hole drilling.

  • Platform: WinOther
  • WEDGECO
  • License: Freeware
  • Price: 0.00

Calculates the volume of a conical wedge

  • Platform: Win2000, WinOther
New Reviews

Print Inspector

Whether you are using a printer connected to your local desktop computer or a print server sometimes you need to see whats going on in your printer by having a close look at the print jobs sent by the users. Print Inspector is such type software ...


Disk Genius

Disk Genius was formerly known as Partition Guru which is an all-in-one solution for disk partition management, data recovery and disk repairing. It can recover lost files from partition, backup and restore partition table, clone partition or clone ...


Safe In Cloud

It is quite difficult to find any computer users nowadays who do not need to use the web, for any purpose. Whether it is for education or entertainment, the web is your best resource. You also need to use various online services for banking, ...


PictBear

Nowadays, a majority of PC users resort to digital image editing once in a while. It may be required for retouching image captured in smart phones or for creating an album in Facebook. For some people, tinkering with digital images is a pastime too. ...


Panda Cloud Cleaner

PC security has become a tricky and complicated subject both for home users and network supervisors, with complexity and risk factors multiplying over the years. Using a single antivirus app may not be enough anymore. That explains why many users ...


SnapCrab

Nearly every PC users need to take screenshots from time to time, whether it is for personal or professional needs. While using the basic Windows screenshot capture method is available, it is not adequate for everyone. When you want to capture ...


BitKiller

Dealing with various types of data efficiently holds the key to success in any computing task. Apart from generating new data and modifying existing files, it becomes necessary to delete existing files at times. While most users resort to using ...


New Downloads

RationalPlan Single Project
for Linux

RationalPlan Single Project is
a project management software
covering the project
management areas starting with
WBS ...

Pidro Challenge

The Pidro card game - a game
of daring and skill. You and
your computer partner play
against two computer
opponents.

DreamPlan Home Edition

DreamPlan Home Edition for
Windows is an easy to use
software. See your dream floor
plan with customized kitchens,
...

Net Monitor for Employees
Professional

The Net Monitor for Employees
is employee monitoring
software that allows you to
see screens of remote
computers or show ...

Sheet Lightning Pro

Sheet Lightning is a
specialised engineering 2D/3D
CAD System for creating and
unfolding sheet metal designs
for ...

IP Tools for Excel

NEW - IP Tools for Excel -
Add-in / Plug-in for Microsoft
Excel. Instant Productivity -
Instant Results in Microsoft
...

AllMyNotes Organizer
Portable

This is simply the most
advanced software to keep all
private info securely
encrypted on USB drive, worry
free. Simply ...

PhotoPad Pro Edition for
Mac

PhotoPad Pro Edition for Mac
Editing Software allows you to
easily edit digital photos and
other pictures. PhotoPad Pro
...

Windows 10 Manager

An all-in-one utility for
windows 10 specially, it
includes over forty utilities
to optimize, tweak, clean up
and fix ...

Aml Maple

Aml Maple has a new kind of
view on keyboard layout
indicators: simple, modern,
flexible. In addition, you can
change the ...